Husqvarna ZTH5223 用户手册

English-

29

1.

Close the fuel valve.

2.

Disconnect the positive cable (red) from 
the battery.

3.

If necessary, drain the motor oil.

4.

Disconnect the gas and choke wires from 
the carburetor.

5.

Disconnect the fuel line (with its filter) 
from the fuel pump.

6.

Disconnect the connecting cable (pigtail) 
from the frame harness connector at the 
side of the starter motor.

7.

Disconnect the cable from the starter 
motor.

8.

Disconnect the cables from the ground 
bolt in front of the starter motor.

9.

Raise and support the back of the mower 
on blocks or similar.

10. Remove the clip holding the oil drain 

hose.

11. Remove the deck belt and clutch (see 

Electrical System\Mower deck clutch).

12. Loosen the bolt (2) and twist the clutch 

tie down (10) aside (see the “Engine 
mounts” diagram).

13. Using a square, 1/2" ratchet wrench, 

loosen the pump belt. Roll the belt off the 
pulley on the engine crankshaft.

14. Remove the four outer bolts in the engine 

mounts.

15. Lift the motor directly upwards and 

secure it in a safe place.

8011-621

8011-606