Husqvarna ZTH5223 用户手册

English-

31

inlet.

14. Connect and adjust the gas and choke 

wires (see below).

15. Check that the oil drain valve is closed 

and fill the engine with oil (see Delivery 
Servicing\Delivery Service).

16. Connect the positive cable (red) to the 

battery’s positive terminal.

17. Open the fuel valve.

See the Kawasaki Service Manual for the engine and auxiliary systems.

See section 8 of the Kawasaki Service 
Manual.

The above section contains a troubleshooting guide for the engine and auxiliary systems. It also has 
separate troubleshooting instructions for the starter motor.

If there is insufficient throttle lever friction, 
throttle settings can alter while the mower is 
being operated. This can be corrected via the 
lever’s pivot bolt.

1.

Free the control console and pull 
forwards. 

2.

Tighten the throttle lever’s pivot bolt.

Check that the engine responds to the throttle 
control and that the correct engine speed is 
achieved at full throttle. 

If adjustment is necessary, adjust the lower 
wire as follows: 

1.

Loosen the clamping screw holding the 
wire’s outer casing and set the lever to 
the full throttle position.

2.

Check that the throttle wire is attached to 
the correct hole in the lower lever, see 

8011-599

8011-554