Shindaiwa 62719-94310 用户手册

5

Product Description

Using the accompanying illustrations as a 

guide, familiarize yourself with your unit 

and its various components. Understanding 

your unit helps ensure top performance, 

long service life, and safer operation.  

See Figure 4.

 WARNING!

Do not make unauthorized modifica-

tions or alterations to any of these 

products or their components.

Specifications

Engine Model ..............................................................Shindaiwa S230
LE231 Dry Weight (less attachments) .......................13.7 lb./6.2 kg
Engine Model ...........................................................Shindaiwa S230C
Engine Type .............................. 2-cycle, vertical-cylinder, air-cooled
Bore x Stroke ............................................ 1.26 x 1.10 in./32 x 28 mm
Displacement ........................................................... 22.5 cc/1.4 cu. in.
Maximum Power ...................... 1.1 HP/0.8 kW @ 7500 RPM (min

-1

)

Fuel/oil Ratio .................................................50:1 with ISO-L-EGD or  

JASO FC class 2-cycle Mixing Oil 

meets or exceeds ISO-L-EGD performance requirements.
Fuel Tank Capacity ..................................................... 22.7 oz./670 ml
Carburetor Type ...........................Walbro WYL-122, diaphragm-type

Muffler ......................................................................  2-Stage, Catalyst
Ignition ........................... One-piece electronic, transistor-controlled
Spark plug ......................................................................Champion CJ8
Air cleaner type ...................... Non-reversible flocked filter element
Starting method ..........................................................................Recoil
Stopping method ...............................................................Slide switch
Transmission type ................................Automatic, centrifugal clutch  

w/bevel gear

EPA Emission  

Compliance Period* ...........................................................Category A

*  The EPA emission compliance referred to on the emission compliance label 

located on the engine, indicates the number of operating hours for which the 
engine has been shown to meet Federal emission requirements.  Category 
C = 50 hours (Moderate), B = 125 hours (Intermediate) and A = 300 hours 
(Extended).

*Specifications are subject to change without notice.

Before assembling, make sure you have all 

the components required for a complete unit:


  Engine assembly



  Outer tube assembly



  Cutting attachment shield



  Handle



  Kit containing cutting attachment shield 

mounting bracket and hardware, handle 

IMPORTANT!

The terms “left”, “left-hand”, and “LH”; 

“right”, “right-hand”, and “RH”; “front” and 

“rear” refer to directions as viewed by the 

operator during normal operation. 

mounting hardware, this manual and tool 

kit for routine maintenance. Tool kits vary 

by model and may include a hex wrench, 

spark plug/screwdriver combination 

wrench, and spanner wrench.

Carefully inspect all components for damage.