Husqvarna 966067001 用户手册

MAINTENANCE

20

1)

 First change after 20 hours.

 2) 

In dusty conditions maintenance is required at shorter intervals. 

3) 

Performed by authorized service workshop. 

4) 

Performed every second year.

With daily use, the machine shall be lubricated twice weekly.

The following is a list of maintenance procedures that must be performed on the machine. For those points not 
described in this manual, visit an authorized service workshop.

MAINTENANCE

Daily

Before 

Staring

Maintenance interval - months/hours

1/25

3/50

6/100

12/300

Check the engine oil level

●

Replace engine oil 

1)

●

Check the air filter

●

Replace air filter cartridge 

2)

●

Clean sludge reservoir for fuel system

●

Check and clean the spark plug

●

Replace spark plug

●

Check idle speed

●

Check and adjust play in valves 

3)

●

Clean fuel tank 

3)

●

Check, replace fuel lines as necessary 

3, 4)

●

Check clutch and clutch cable

●

Check flail blade lock washers

●

Check decals and warning signs

●

Check the seed holes for the seeder

●

Check wear and tension on the belts

●

Check blade wear and condition

●

Check the chassis, bolts and set screws

●

Check the seed control lever for the seeder

●

Check the wire mountings on the seeder

●

Lubrication; see the Lubrication schedule