National Instruments NI 5670 用户手册

© National Instruments Corporation

4.

Click Stop to stop waveform generation.

5.

Click Close to return to MAX.

6.

Exit MAX.

You have completed setup, configuration, and testing of the 
NI 5650/5651/5652 RF Signal Generator.

If you plan to share triggers or clocks to synchronize NI-DAQmx devices, 
you must identify or configure certain components in MAX.

The following steps are required for any type of synchronization involving an 

NI-DAQmx device. 

♦ PXI devices—identify the PXI system controller by completing the 

following steps:

1.

In the MAX configuration tree under Devices and Interfaces, 
right-click PXI System

Identify As and select your controller from 

the list. For example, select External PC if you are using a MXI-3 or 
MXI-4 controller in an external PC.

2.

Expand the PXI System tree and select the chassis name to identify the 
chassis you are using. 

♦ PXI Express devices controlled via MXI-Express—in the MAX 

configuration tree under Devices and Interfaces, right-click PXI 
System»Identify As and select External PC. Your chassis will be 
automatically identified.

♦ PXI Express controller—a PXI Express controller installed in a PXI 

Express chassis is automatically identified in MAX.

You can generate signals with the NI RF signal generator using the 
NI-RFSG instrument driver. You also can run the NI-RFSG examples 
to demonstrate the functionality of the NI RF signal generator.