Roland PCR-800 用户手册

 

You can assign an RPN or NRPN to a controller.

 

fig.H-Edit.eps

 

Press the [EDIT] button so it’s lit.

 

fig.D-Edit.eps

 

The display will indicate “EDIT.”

 

fig.D-r1.eps

 

Slightly move the controller to which you want to assign an RPN or 
NRPN message.
If the controller is a button, press it.
The display will indicate the number of the controller you selected.

 

Check the indication in the display, then press the [ENTER] button.

 

fig.D-RPN.eps

 

Turn the VALUE knob to make “RP” appear.

 

Press the [ENTER] button.

 

fig.D-RPNEdit0.eps

 

Turn the VALUE knob or press controller [A1 (0)] to select the basic 
editing “RP0” indication.

 

fig.D-ChannelSelect.eps

 

Press the [ENTER] button.
“CH- -” will be blinking in the display.

 

Enter the channel. Use the VALUE knob or controllers [A1 (0)]–[B2 (9)] to specify 
the desired channel.

 

Press the [ENTER] button.

 

fig.D-MSBSelect.eps

 

Use the VALUE knob or controllers [A1 (0)]–[B2 (9)] to specify the 
desired RPN MSB (CC#101) or NRPN MSB (CC#99).

 

Press the [ENTER] button.

 

fig.D-LSBSelect.eps

 

Use the VALUE knob or controllers [A1 (0)]–[B2 (9)] to specify the 
desired RPN LSB (CC#100) or NRPN LSB (CC#98).

 

Press the [ENTER] button.

 

As appropriate for the type of controller, set the button mode (p. 64) or make 
virtual center click settings (p. 65).

 

Basic editing

[A1 (0)]

0–127 (00–7FH)

Not transmitted

PORT 1

Advanced editing

[A2 (1)]

You can specify the upper 

and lower limits

0–127 (00–7FH)

PORT 1, 
PORT 2, 

PORT 1+2

PCR-300_500_800_e.book 53 ページ ２００６年１２月１９日　火曜日　午後２時５９分