Roland V-Synth 用户手册
132
Effects List
31: Enh
→
Cho/Flg
(Enhancer
→
Chorus/Flanger)
This effect connects Enhancer and either Chorus or Flanger in series.
fig.MFX-31
32: Enh
→
Delay (Enhancer
→
Delay)
This effect connects an Enhancer and a Delay in series.
fig.MFX-32
Parameter
Value
Description
Enhan Sens #1
0–127
Sensitivity of the enhancer
Enhan Frequen-
cy
cy
0–127
Sets the lower limit of the fre-
quencies to which the enhance-
ment effect is added.
quencies to which the enhance-
ment effect is added.
Enhan Mix Lev-
el
el
0–127
Level of the overtones generated
by the enhancer
by the enhancer
Enhan Level
0–127
Volume of the enhancer sound
Mod Mode
CHORUS,
FLANGER
FLANGER
Selects whether to use chorus or
flanger.
flanger.
Mod Rate #2
0.05–10.0 Hz,
note
note
Adjusts the speed of modulation
for the chorus or flanger.
for the chorus or flanger.
Mod Depth
0–127
Adjusts the depth of modulation
for the chorus or flanger.
for the chorus or flanger.
Mod Phase
0–180 deg
Sets how the chorus or flanger
sound is spread.
sound is spread.
Mod Pre Delay
0–50.0 ms
Adjusts the delay time from the
direct sound until the chorus or
flanger sound is heard.
direct sound until the chorus or
flanger sound is heard.
Mod Feedback
-98– +98 %
Adjusts the proportion of the ef-
fect sound that is fed back into
the effect. Negative (-) settings
will invert the phase.
fect sound that is fed back into
the effect. Negative (-) settings
will invert the phase.
Xover LowFreq 50–4000 Hz
Attenuates the effect in the
range below the specified fre-
quency.
range below the specified fre-
quency.
Xover Low Gain -36–0 dB
Specifies how greatly the low
range will be attenuated.
range will be attenuated.
Xover HiFreq
2000–20000 Hz
Attenuates the effect in the
range above the specified fre-
quency.
range above the specified fre-
quency.
Xover Hi Gain
-36–0 dB
Specifies how greatly the high
range will be attenuated.
range will be attenuated.
Mod Level
0–127
Volume of the chorus or flanger
sound.
sound.
Ps Low Freq
50–4000 Hz
Frequency of the low range
Ps Low Gain
-15– +15 dB
Gain of the low range
Ps Hi Freq
2000–20000 Hz
Frequency of the high range
Ps Hi Gain
-15– +15 dB
Gain of the high range
L
R
Enhancer
2-Band
EQ
Chorus/
Flanger
Parameter
Value
Description
Enhan Sens #1
0–127
Sensitivity of the enhancer
Enhan Frequen-
cy
cy
0–127
Sets the lower limit of the fre-
quencies to which the enhance-
ment effect is added.
quencies to which the enhance-
ment effect is added.
Enhan Mix Lev-
el
el
0–127
Level of the overtones generated
by the enhancer
by the enhancer
Enhan Level
0–127
Volume of the enhancer sound
Delay Time
0–1300 ms, note Adjusts the delay time from the
direct sound until the delay
sound is heard.
sound is heard.
Delay Feedback
#2
#2
-98– +98 %
Adjusts the proportion of the de-
lay sound that is fed back into
the effect. Negative (-) settings
will invert the phase.
lay sound that is fed back into
the effect. Negative (-) settings
will invert the phase.
Low Damp Freq 50–4000 Hz
Adjusts the frequency below
which sound fed back to the ef-
fect will be cut.
The Low Damp function damps
the low frequency band of the
delay sound quicker than other
bands, which makes for a clearer
delay effect.
which sound fed back to the ef-
fect will be cut.
The Low Damp function damps
the low frequency band of the
delay sound quicker than other
bands, which makes for a clearer
delay effect.
Low Damp
Gain
Gain
-36–0 dB
Degree of Low Damp
Hi Damp Freq
2000–20000 Hz
Adjusts the frequency above
which sound fed back to the ef-
fect will be cut.
High Damp, by attenuating the
higher frequencies first, makes
the delay sound more natural.
which sound fed back to the ef-
fect will be cut.
High Damp, by attenuating the
higher frequencies first, makes
the delay sound more natural.
Hi Damp Gain
-36–0 dB
Degree of High Damp
Delay Level
0–127
Volume of the delay sound.
Ps Low Freq
50–4000 Hz
Frequency of the low range
Ps Low Gain
-15– +15 dB
Gain of the low range
Ps Hi Freq
2000–20000 Hz
Frequency of the high range
Ps Hi Gain
-15– +15 dB
Gain of the high range
L
R
Enhancer
2-Band
EQ
Delay