Roland PCR-50 用户手册

Edit mode (EDIT)

■

Here’s how you can assign a system exclusive message to a controller. Advanced mode 2 lets you 
assign a single-byte system message (System realtime message, tune request). 
Advanced modes 3 and 4 let you assign any desired message.(Input up to 24 bytes)

SYS EX. ASSIGN can calculate the checksum automatically, and lets you specify a variable (data) 
range or embed a channel/block number within the message. (

In SYS EX. ASSIGN, the input mode will be HEX mode.

fig.edt

Press the 

 button.

The display will indicate “EDT”.

Slightly move the controller to which you want to assign the system exclusive message. In the 
case of a button, press that button.

fig.r-1

The display will indicate the number of the selected controller.

Confirm what’s indicated, and press the 

 button.

fig.se0

Press the 

 key. 

If you want to select an Advanced mode, press a key from 

 to 

.

The selected mode will blink in the display.

Confirm what’s indicated, and press the 

 button.

fig.f0

The display will blink “F0”, which is the first byte (starting status byte) 
of a system exclusive message. (This cannot be changed.)

Confirm what’s indicated, and press the 

 button.

Use the 

–

 keys to input the second byte.

Press the 

 button.

Basic mode

0

Sys Ex. message

Default range

Input F7

1st byte fixed at F0

Advanced 

mode 1

1

Sys Ex. message

Assignable

Input F7

1st byte fixed at F0

Advanced 

mode 2

2

Single byte system message –

–

 

 

 buttons 

are invalid

Advanced 

mode 3

3

Any desired MIDI message

Default range

Specified number of 

bytes

 button is 

invalid

Advanced 

mode 4

4

Any desired MIDI message

Assignable

Specified number of 

bytes

 button is 

invalid