Roland PCR-50 用户手册

Edit mode (EDIT)

In the case of Advanced mode 4, specify the upper and lower limits.

Specify the output port.  (➔

If you are making an assignment for a button, specify the button mode. (➔

●

Here’s how to assign a GM2 System On system exclusive message in 

.

1. Press the 

 button.

The display will indicate “EDT”.

2. Slightly move the controller to which you want to assign the system exclusive 

message. In the case of a button, press that button.
The display will indicate the number of the selected controller.

3. Confirm what’s indicated, and press the 

 button.

4. Press the 

 key.

The display will indicate “SE0”.

5. Confirm what’s indicated, and press the 

 button.

The display will indicate “F0”, which is the first byte (beginning status) of a system exclusive 
message. This cannot be changed. (This cannot be changed.)

6. Confirm what’s indicated, and press the 

 button.

7. Use the 

 and 

 keys to input the second byte “7E”.

8. Confirm what’s indicated, and press the 

 button.

9. Use the 

 and 

 keys to input the third byte “7F”.

10. Confirm what’s indicated, and press the 

 button.

Input the fourth and fifth bytes in the same way.

11. Finally, use the 

 and 

 keys to input the ending status byte “F7”.

12. Confirm what’s indicated, and press the 

 button.

13. Specify the output port. (➔

14. If you are making an assignment for a button, specify the button mode. 

(➔

The GM2 System On message has now been assigned.