Roland TD-6V 用户手册
64
Chapter 1 Creating Your Own Drum Kit (Kit Edit)
Pitch Control with the Hi-Hat
Control Pedal On/Off for Each Pad
(Pitch Control Assign)
Pitch Control
is a function that lets you change the pitch of an
instrument assigned to a pad according to the amount the hi-
hat control pedal is pressed. Releasing the pedal returns the
instrument to its original pitch.
hat control pedal is pressed. Releasing the pedal returns the
instrument to its original pitch.
Here, make the Pitch Control on/off setting for each pad.
When set to “OFF,” the instrument’s pitch remains
unchanged.
unchanged.
The range over which the pitch changes is set in
“PchCtrlRange (Pitch Control Range)” (KIT/COMMON/
PchCtrlRange; p. 66).
“PchCtrlRange (Pitch Control Range)” (KIT/COMMON/
PchCtrlRange; p. 66).
• To prevent the pedal hi-hat sound from being played
when the hi-hat pedal is pressed, set “Pedal HH Vol
(Pedal Hi-Hat Volume)” to “0” (KIT/COMMON/Pedal
HH Vol; p. 66).
(Pedal Hi-Hat Volume)” to “0” (KIT/COMMON/Pedal
HH Vol; p. 66).
• To make pitch changes occur more smoothly, set
“PdlDataThin (Pedal Data Thin)” to “1” or “OFF”
(SETUP/MIDI COMMON/PdlDataThin; p. 99).
(SETUP/MIDI COMMON/PdlDataThin; p. 99).
fig.01-039_50
Pitch Ctrl (Pitch Control Assign): OFF, ON
MIDI Note Number for Each Pad
(Note Number)
In each drum kit, you can set the MIDI note numbers to be
transmitted/received by each pad.
transmitted/received by each pad.
For the hi-hat, make the setting only for the note number for
the Open Hi-Hat (default setting is 46 (A#2)). With this setting,
the closed hi-hat (initial settings value of 42 (F#2)) and pedal
hi-hat (initial settings value of 44 (G#2)) are changed together
to the open setting.
the Open Hi-Hat (default setting is 46 (A#2)). With this setting,
the closed hi-hat (initial settings value of 42 (F#2)) and pedal
hi-hat (initial settings value of 44 (G#2)) are changed together
to the open setting.
When the open hi-hat note number is set to “60 (C4),” the note
number for the closed hi-hat becomes “56 (G#3)” and the note
number for the pedal hi-hat becomes “58 (A#3).”
number for the closed hi-hat becomes “56 (G#3)” and the note
number for the pedal hi-hat becomes “58 (A#3).”
For information on factory-set note number settings, refer to
“Drum Kit Note Numbers” (p. 125) in the “Preset Percussion
Set List.”
“Drum Kit Note Numbers” (p. 125) in the “Preset Percussion
Set List.”
fig.01-041_50
Note No. (Note Number): 0 (C -) –127 (G 9)
Sounding an External MIDI Device by
Playing Pads Connected to the TD-6V
Playing Pads Connected to the TD-6V
Specify the MIDI note numbers (key numbers on a keyboard)
that will be transmitted by the TD-6V when the pads are
struck.
that will be transmitted by the TD-6V when the pads are
struck.
Set this to the note number of the sound that you wish to play
on the external sound module or sampler.
on the external sound module or sampler.
Using an External MIDI Device to Play
TD-6V Drum Kit Part Sounds
(TD-6V Used As Sound Module)
TD-6V Drum Kit Part Sounds
(TD-6V Used As Sound Module)
Specify the note number corresponding to the pad. When the
TD-6V receives the note number specified here, the
instrument assigned to the pad is played.
TD-6V receives the note number specified here, the
instrument assigned to the pad is played.
On the TD-6V, the drum kit part and percussion part can both
be set to Channel 10 at the same time.
be set to Channel 10 at the same time.
When two parts are set to channel 10, you should also set
TD-6KV_e.book 64 ページ ２００５年１月２４日 月曜日 午後７時４分