Roland XV-3080 用户手册

If no sound can be heard, or if the unit does not perform as 
you expect, check the following points first. If this does not 
resolve the problem, contact your dealer or a nearby Roland 
service station.

• Check the VOLUME knob, and the volume settings on 

the connected amp/mixer etc.

• If there is sound in the headphones, it is possible that the 

connection cables are broken, or that the amp or mixer is 
malfunctioning. Check the connection cables and other 
devices once again.

• Make sure that the MIDI transmit channel of the 

connected device matches the receive channel of theXV-
3080. (

• Check the level settings of each Tone, Patch and each 

• Check the on/off settings of each Tone and each Part. 

• Check the key range settings of each Tone and each Part. 

• The volume will return to normal when the power is 

turned on once again. When a Performance or Rhythm 
Set is selected, the reception status for each type of 
message can be viewed in the PART INFO page. (p. 107)

• Check settings such as Effect On/Off (p. 21), and Effect 

Balance and Level (p. 22—34).

• Check the Output Assign and MFX Output Assign 

settings. (p. 72—81)

• When [RX] is on in the PERFORM PLAY page, [A]—[H] 

(PART SELECT [1/9]—[8/16]) act as buttons which turn 
Parts on/off. (p. 102) Turn [RX] off.

• When [RX] is on in the various Performance setting 

pages, PART SELECT [1/9]—[8/16] function as buttons 
to switch each Part on/off. (p. 102) Turn [RX] off.

• Check the setting. (p. 130)

• Check the setting. (p. 130)

• ’Check each setting. (Tone p. 92, Part p. 106)

• The pitch will return to normal when the power is 

turned on. If a Performance or Rhythm Set is selected, 
the PART INFO page allows you to check the reception 
status of each type of messages. (p. 107)