Roland XV-3080 用户手册
150
Error Messages
If there has been a mistake in operation, or if the XV-3080 is
unable to continue processing as you directed, an error
message will appear in the display. Take the appropriate
action for the displayed error message. This section gives the
error messages in alphabetical order.
unable to continue processing as you directed, an error
message will appear in the display. Take the appropriate
action for the displayed error message. This section gives the
error messages in alphabetical order.
Battery Low
Situation:
The internal backup battery that is preserving
the contents of user memory has run down.
the contents of user memory has run down.
Action:
Consult your dealer or a nearby Roland service
station to have the battery replaced.
station to have the battery replaced.
File Format Error
Situation:
The XV-3080 cannot handle this file.
File I/O Error
Situation:
It was not possible to save/load a file.
Action:
Try the operation once again. If the same
message appears, that file has been damaged.
Delete the damaged file.
message appears, that file has been damaged.
Delete the damaged file.
File Name Duplicate
Situation:
A file of the same name exists on the memory
card.
card.
Action:
Use a different file name.
File Name Format Error
Situation:
A file name has not been assigned.
Action:
Assign a file name.
File not Found
Situation:
The specified file was not found.
Action:
Insert the memory card that contains the
specified file, and try the operation once again.
specified file, and try the operation once again.
Memory Card Full
Situation:
There is insufficient space available on the
memory card to save the data.
memory card to save the data.
Action:
Either insert a different memory card, or delete
unnecessary data and try the operation once
again.
unnecessary data and try the operation once
again.
Memory Card I/O Error
Situation:
It is possible that the memory card has been
scratched or otherwise damaged.
scratched or otherwise damaged.
Action:
If the memory card has been damaged, do not
use that memory card. If the same error message
appears repeatedly, consult your dealer or a
nearby Roland service station.
use that memory card. If the same error message
appears repeatedly, consult your dealer or a
nearby Roland service station.
Memory Card not Ready
Situation:
A memory card is not inserted in the MEMORY
CARD slot.
Action:
Turn off the power, and insert a memory card.
Memory Card Write Protected
Situation:
Since a write protect sticker is affixed to the
memory card, data cannot be saved to the card
bank.
memory card, data cannot be saved to the card
bank.
Action:
Remove the write protect sticker from the
memory card.
memory card.
MIDI Buffer Full
Situation:
Due to an inordinate volume of MIDI messages
received, the XV-3080 has failed to process them
properly.
received, the XV-3080 has failed to process them
properly.
Action:
Reduce the amount of MIDI messages to be
transmitted.
transmitted.
MIDI Communication Error
Situation:
A problem has occurred with the MIDI cable
connections.
connections.
Action:
Check that MIDI cables are not broken or pulled
out.
out.
Receive Data Error
Situation:
A MIDI message was received incorrectly.
Action:
If the same error message is displayed
repeatedly, there is a problem with the MIDI
messages that are being transmitted to the XV-
3080.
repeatedly, there is a problem with the MIDI
messages that are being transmitted to the XV-
3080.
Unformatted Memory Card
Situation:
This memory card cannot be used by the XV-
3080.
3080.
Action:
Format the memory card on the XV-3080.
User Memory Damaged
Situation:
The data in user memory has been lost.
Action:
Use the Factor Reset function (UTILITY/UTIL
2/FACTORY RESET) to initialize the memory to
the factory settings.
2/FACTORY RESET) to initialize the memory to
the factory settings.
User Memory Write Protected
Situation 1:
The Internal parameter (UTILITY/UTIL 1/
PROTECT/WRITE PROTECT) is turned ON.
PROTECT/WRITE PROTECT) is turned ON.
Action 1:
Turn the Internal parameter OFF.
Situation 2:
The Exclusive parameter (UTILITY/UTIL 1/
PROTECT/WRITE PROTECT) is turned ON,
and Exclusive messages cannot be received.
PROTECT/WRITE PROTECT) is turned ON,
and Exclusive messages cannot be received.
Action 2:
Turn the Exclusive parameter OFF.