Roland XV-3080 用户手册

The XV-3080 has three built-in effect units: Multi-Effects, 
Chorus and Reverb. You can independently edit each unit’s 
settings.

The Multi-Effects unit offers 63 effects ranging from single 
effects – such as distortion and delay – to powerful 
combination effects. The Multi-Effects unit also includes its 
own chorus and reverb effects independent of the dedicated 
Chorus and Reverb effects described below.

Chorus adds depth and spaciousness to the sound.

Reverb adds ambience – such as the sound of a concert hall 
or auditorium – to sounds.

You can turn any of the XV-3080’s effect units – Multi-effects, 
Chorus and Reverb – on or off using a single procedure.

1. Press [EFFECTS ON/OFF] to make its indicator light.

fig.2-01.e

2. Use [

]/[

] to move the cursor beneath the effect 

that you wish to turn on/ or off.

3. Pressing [INC] turns the selected effect unit on, while 

pressing [DEC] turns it off.

You might, for example, want to turn effects off when 
creating a new Patch so that you can hear what it sounds like 
without effects. You may also want to turn off the XV-3080’s 
effects when you wish to use external effect devices instead 
of the built-in effects.

The Multi-Effects, Chorus and Reverb effects can be set up 
individually for each Patch. You can adjust the amount of 
effect to be applied to the Tones in a Patch by adjusting their 
Send Levels to each of the effect units.

fig.2-01a.e

1. Select the Patch you wish to work with.

2. Press [EFFECTS] to make its indicator light.

3. Press [

] / [

] to select the page you wish to display.

4. Press [

] / [

] to move the cursor to the 

parameter that you wish to adjust.

5. Turn the VALUE dial or press [INC] / [DEC] to select the 

desired value.

6. Repeat Steps 3 to 5 to set the Effect.

7. Press [EXIT] to return to the PATCH PLAY page.

A “*” symbol will appear at the left of the Patch name, 
indicating that its settings have been modified.

fig.2-02.e