Roland XV-3080 用户手册
71
Chapter 2 Using the XV-3080 Effects
Chapter 2
Copying Effect Settings
You can copy the effect settings from any Patch,
Performance, or Rhythm Set into the currently selected
Patch, Performance, or Rhythm Set. This can save a great
deal of time and effort when setting up effects.
Performance, or Rhythm Set into the currently selected
Patch, Performance, or Rhythm Set. This can save a great
deal of time and effort when setting up effects.
1. Make sure that a Patch, Performance, or the GM
System[RB12] is selected.
2. Press [UTILITY] to make its indicator light.
3. Press [
] / [
] to select the UTIL 1 page.
4. Use [
] / [
] to make “COPY” blink, and then
press [ENTER].
5. Press [
] / [
] to select the FX COPY page.
fig.patch
fig.perform
fig.gm
6. Press [
] / [
] to move the cursor to the
parameter that you wish to set.
Press [
] to move to the next display, and then select the
contents of the effect that you wish to copy.
fig.xp112
ALL:
Multi-effects, chorus, and reverb settings
MFX:
Multi-effects settings
CHORUS:
Chorus settings
REVERB:
Reverb settings
CHO&REV:
Chorus and reverb settings
7. Turn the VALUE dial or press [DEC] / [INC] to select the
desired value.
8. Press [ENTER] to execute the Copy operation.
9. Press [EXIT] two times to return to the applicable PLAY
page.
When using 3D effects
The following three 3D effects utilize RSS (Roland Sound
Space) technology to create a spaciousness that cannot be
produced by delay, reverb, chorus, etc.
Space) technology to create a spaciousness that cannot be
produced by delay, reverb, chorus, etc.
48: 3D DELAY
60: 3D CHORUS
61: 3D FLANGER
When using these effects, we recommend that you place
your speakers as follows. Also, make sure that the
speakers are at a sufficient distance from the walls on
either side.
your speakers as follows. Also, make sure that the
speakers are at a sufficient distance from the walls on
either side.
fig.RSS
If the left and right speakers are too far apart, or if there
is too much reverberation, the full 3D effect may not
appear.
is too much reverberation, the full 3D effect may not
appear.
Each of these effects has an
Out (Output Mode)
parameter. If the sound from the OUTPUT jacks is to be
heard through speakers, set this parameter to Speaker. If
the sound is to be heard through headphones, set it to
Phones. This will ensure that the optimal 3D effect will
be heard. If this parameter is not set correctly, the full 3D
effect may not appear.
heard through speakers, set this parameter to Speaker. If
the sound is to be heard through headphones, set it to
Phones. This will ensure that the optimal 3D effect will
be heard. If this parameter is not set correctly, the full 3D
effect may not appear.
30˚
30˚
Copy Source
Copy source Patch/Performance/
Rhythm Set
(group, number, name)
Rhythm Set
(group, number, name)
Copy Type