Roland R-1 用户手册

 

This section explain how to record audio from an external device via the line input jack.
* The R-1 does not have a digital input jack.

As an example, here’s how to record from a CD player into the R-1.

 

fig.cd

 

The microphone input is disabled if you connect a device or cable to the line 
input jack. This means that you cannot record the microphone input and line 
input mixed together. If something is connected to both the line input jack and 
the mic input jack, only the sound entering the line input jack will be recorded.

 

Make sure that the R-1’s power is turned off. Set the 

 

 to the 

minimum position.

 

Turn on the R-1’s power as described in 

 

 

Specify the type of file you want to record, as described in 

 

 

specify the desired setting or to check the current setting.

 

Use an audio cable to connect the output jacks of your CD player to the R-1’s

 

.

 

On your CD player, play back the song that you want to record and adjust the 
input level as described below. -> 

 

R-1_egfis1.book 35 ページ ２００５年１１月１１日　金曜日　午後５時１３分