Roland R-1 用户手册

 

If you experience difficulties, read this section first. It contains tips on how to resolve 
various problems.

 

Some mics are stereo, while others are monaural. If you are using a monaural mic, the 
sound will be recorded on the L (left) channel.
In this case, you can use 

 

select MONO as the mic type. This setting is remembered even when the power is 
turned off.

 

 

Check the remaining space on your CompactFlash memory card. Recording is not 
possible if there is little time remaining on the card. In this case, the R-1 will enter 
recording-standby mode, but you will return to the play mode screen if you attempt to 
start recording by pressing the record button or play button.
In recording-standby mode, the screen shows the amount of remaining recordable time. 
An indication of 0:00:00 means that there is no time left. Please check the display.

 

 

The internal mic cannot be used if a mic, cable, or device is connected to the 

 

 or 

 

. If you want to use the internal mic, don’t connect anything to 

the other input jacks.

 

 

 

 

The sound will distort if the 

 

 is too high. Adjust the input level 

 

In some cases, the sound will distort if you apply an effect while recording. Adjust the 
input level while the effect is applied. You can also try adjusting the effect parameters 
so that distortion does not occur.

 

 

R-1_egfis1.book 67 ページ ２００５年１１月１１日　金曜日　午後５時１３分