Roland SP-606 用户手册
34
Chapter 2. Using Effects
You can exchange MFX1 and MFX2 by holding down [FUNC] and pressing [F1] (EXCHG). A
message of “Exchange MFX1&2, Are You Sure?” will appear. Press [F3] (EXEC) to perform the
exchange, or press [F2] (CANCEL) if you decide to cancel the operation.
message of “Exchange MFX1&2, Are You Sure?” will appear. Press [F3] (EXEC) to perform the
exchange, or press [F2] (CANCEL) if you decide to cancel the operation.
4.
Press [F1] (LIST) to get the MFX1 TYPE LIST or MFX2 TYPE LIST
screen.
screen.
5.
Turn the VALUE dial or use [
][
][DEC][INC] to select the effect
type.
Effect types 1–16 can be selected directly by pressing pads
[1]–[16].
[1]–[16].
6.
Press [F3] (SELECT) or [ENTER] to confirm your choice.
You will return to the
EFFECT INFO
(Effect Information) screen.
If you decide to cancel, press [EXIT].
You can select whether effects will be applied to multiple pads, to individual pads, or to the audio input via USB.
1.
2.
Hold down [FUNC] and press pad [12] (MFX ASGN) to get the MFX
ASSIGN screen.
ASSIGN screen.
3.
Turn the VALUE dial or use [DEC][INC] to select the pad bank for
which you want to make settings.
which you want to make settings.
4.
Press the appropriate pads to turn MFX assign on/off. The setting
will alternate on/off each time you press the pad.
will alternate on/off each time you press the pad.
MFX is turned on for
pads
that are displayed in black on the screen.
You can press [F2] (BANK) to switch all sixteen pads of the pad bank on/off.
5.
Pressing [F1] (USB) will switch MFX assign on/off for the audio input received via USB.
MFX is enabled for
USB
audio if the
USB
indication in the screen is highlighted in black.
6.
Press [F3] (WRITE) to save the settings.
A message of “MFX Assign Write, Are You Sure?” will appear. Press [F3] (EXEC) to save the settings, or press [F2]
(CANCEL) if you decide to cancel the operation.
(CANCEL) if you decide to cancel the operation.
7.
Press [EXIT] to return to the Play screen.
1.
2.
Press [F3] (EFFECT) to get the EFFECT INFO (Effect Information)
screen.
screen.
The screen shows the settings for the MFX module being controlled by
the CTRL 1–3 knobs.
the CTRL 1–3 knobs.
3.
Press [F3] (MASTER) to get the MASTERING screen.
You can also get this screen by holding down [FUNC] and
pressing [MASTERING].
pressing [MASTERING].
Selecting a Mastering Setup
4.
Press [F1] (LIST) to get the MASTERING SETUP LIST screen.
5.
Turn the VALUE dial or use [
][
][DEC][INC] to select the mastering setup you want to use.
“1 USER SET” is selected when you turn on the power. If you want to use a certain preset setting as
the power-on default, write those preset settings to “1 USER SET.”
the power-on default, write those preset settings to “1 USER SET.”
Selecting What the Effect Will Apply to (MFX Assign)
Making Mastering Settings
SP-606_e.book 34 ページ 2004年6月21日 月曜日 午前10時8分