Roland SP-606 用户手册
35
Chapter 2. Using Effects
6.
Press [F3] (SELECT) or [ENTER] to confirm your choice.
You will return to the
MASTERING
screen.
If you decide to cancel, press [EXIT].
Editing the Mastering Setup
7.
Use [
][
] to select the parameter you want to edit.
Turn the VALUE dial or use [DEC][INC] to edit the parameter value.
8.
If you want to save your settings, press [F3] (WRITE) to save them to “1 USER SET.”
9.
The display will ask “System Write, Are You Sure?” To save your settings, press [F3] (EXEC) or [ENTER].
If you decide not to save your settings, press [F2] (CANCEL) or [EXIT].
Parameter
Value
Explanation
Spilt Freq
200–8000Hz
Frequency at which the High and Low ranges are divided
In Level
-24–0dB
Mastering input volume
Low Attack
0.05–50ms
Time over which compression is applied to the volume after the input exceeds the
Low Threshold
Low Threshold
Low Release
0.05–2000ms
Time over which compression is released after the input falls below the Low
Threshold
Threshold
Low Threshold
0–127
Volume level at which compression begins to be applied to the low frequency
range
range
Low Ratio
1:1–inf:1
Compression ratio for the low frequency range (inf: infinite)
Low Level
-24–+24dB
Output volume of the low frequency compressor
High Attack
0.05–50ms
Time over which compression is applied to the volume after the input exceeds the
High Threshold
High Threshold
High Release
0.05–2000ms
Time over which compression is released after the input falls below the High
Threshold
Threshold
High Threshold
0–127
Volume level at which compression begins to be applied to the high frequency
range
range
High Ratio
1:1–inf:1
Compression ratio for the high frequency range (inf: infinite)
High Level
-24–+24dB
Output volume of the high frequency compressor
List of Effects
MFX
CTRL 1
CTRL 2
CTRL 3
1 FILTER + DRIVE
CUTOFF
RESO
DRIVE
This is a low pass filter with
overdrive. It cuts the high-fre-
quency range and adds distor-
tion.
overdrive. It cuts the high-fre-
quency range and adds distor-
tion.
Adjusts the frequency at which
the sound will be cut.
the sound will be cut.
Adjusts the amount of peak
(boost) applied to the region of
the cutoff frequency.
(boost) applied to the region of
the cutoff frequency.
Adds distortion.
2 REVERB
REV TIME
HF DAMP
E.LEVEL
This is a reverb that cuts the re-
verb sound midway through
its decay.
verb sound midway through
its decay.
Adjusts the length of the rever-
beration.
beration.
Adjusts the frequency at which
the high-frequency portion of
the reverb is cut.
the high-frequency portion of
the reverb is cut.
Adjusts the volume of the re-
verb sound.
verb sound.
3 DELAY
DLY TIME
FEEDBACK
E.LEVEL
This is a stereo delay
Adjusts the delay length (
*2
)
Adjusts the proportion of the
delayed sound that will be re-
turned to the input.
delayed sound that will be re-
turned to the input.
Adjusts the volume of the de-
lay sound.
lay sound.
4 TAPE ECHO
REPEAT
INTENS
E.LEVEL
This simulates a classic tape-
type echo unit.
type echo unit.
Adjusts the tape speed.
Adjusts the number of echo re-
peats.
peats.
Adjusts the volume of the echo
sound.
sound.
5 ISOLATOR
LOW
MIDDLE
HIGH
Isolates or eliminates the low,
mid, or high-frequency re-
gions.
mid, or high-frequency re-
gions.
Isolates/eliminates the low-
frequency range.
frequency range.
Isolates/eliminates the mid-
frequency range.
frequency range.
Isolates/eliminates the high-
frequency range.
frequency range.
SP-606_e.book 35 ページ ２００４年６月２１日 月曜日 午前１０時８分