Roland SP-606 用户手册

下载
页码 104
 
61
 
Chapter 6. Pattern Editing
 
1.
 
 
2.
 
Turn the VALUE dial or use [DEC][INC] to select the pattern you want 
to edit.
 
 
3.
 
Press [F2] (EDIT) to get the PATTERN EDIT screen.
 
4.
 
Press [F2] (SWING) to get the SWING screen.
 
5.
 
Use [
][
] to select the parameter you want to edit.
 
Turn the VALUE dial or use [DEC][INC] to edit the parameter value.
 
6.
 
Press [EXIT] to return to the PATTERN EDIT screen.
 
1.
 
 
2.
 
Turn the VALUE dial or use [DEC][INC] to select the pattern you want to edit.
 
 
3.
 
Press [F2] (EDIT) to get the PATTERN EDIT screen.
 
4.
 
Press [F3] (NAME) to get the PATTERN NAME screen.
 
5.
 
Use [
][
] to move the cursor to the character you want to 
change, and turn the VALUE dial or use [DEC][INC] to change the 
character.
 
Press [F1] (TYPE) to switch between uppercase/lowercase/numerals.
Press [F2] (DELETE) to delete the character at the cursor location.
Press [F3] (INSERT) to insert a space at the cursor location.
 
6.
 
Press [ENTER] to update the name of the pattern.
 
If you decide to cancel, press [EXIT].
 
Changing the Groove of a Pattern (SWING)
 
Parameter
Value
Explanation
 
Position
8th notes,
16th notes
Specifies the swing timing as a note value.
Percentage
0%–100%
Specifies how far the backbeats (relative to the notes specified by Position) will be 
shifted away from the downbeats. Shifting the timing of the backbeats will pro-
duce a sense of “swing.”
 
0%
 
The backbeats will be at the same timing as the downbeats.
 
50%
 
:  The backbeats will be exactly between the adjacent downbeats.
 
100%
 
:  The backbeats will be at the same timing as the preceding downbeat.
Track 1
OFF, ON
Specifies whether swing will be applied to each track.
 
*
 
 The check mark means that swing will be applied.
Track 2
OFF, ON
Track 3
OFF, ON
Track 4
OFF, ON
 
Naming a Pattern
SP-606_e.book 61 ページ 2004年6月21日 月曜日 午前10時8分