Roland SP-606 用户手册
63
Chapter 7. Songs
You create a song by connecting patterns in the desired order.
1.
2.
While the song is stopped, turn the VALUE dial or use [DEC][INC] to select the song you want to record.
3.
Press [
] (Record) to get the SONG RECORDING screen.
In the upper line of the screen, the song number and name (“Empty
Song” if the song is empty) are shown at the left, and the current step/
total number of steps (“EMPTY” if the song is empty) are shown at the
right.
The lower line of the screen shows the pattern number and name of each
step. (If the song is empty, this will indicate “EMPTY.”)
Song” if the song is empty) are shown at the left, and the current step/
total number of steps (“EMPTY” if the song is empty) are shown at the
right.
The lower line of the screen shows the pattern number and name of each
step. (If the song is empty, this will indicate “EMPTY.”)
4.
Move to the step at which you want to insert a pattern.
Pressing [
] (Rewind) will move to the previous step, and pressing [
] (Fast-forward) will move to
the next step.
5.
Turn the VALUE dial or use [DEC][INC] to select a pattern, and press [F3] (SELECT) or [ENTER] to confirm
the pattern for the current step.
the pattern for the current step.
To stop, press [
] (Stop).
6.
Repeat steps 4–5 to continue recording.
7.
When you are finished, press [
] (Stop).
You can execute Undo/Redo by holding down [FUNC] and pressing [
Recording a Song
Basic Procedure for Recording a Song
SP-606_e.book 63 ページ ２００４年６月２１日 月曜日 午前１０時８分