Roland VS-1824 用户手册

6. Only the sources—Input Mixer Channels and Track 

Mixer Channels—you specified during Step 5 will be 

shown. Use [

], [

], [

], and [

] to move 

the cursor and the TIME/VALUE dial to adjust each of 
the values.

fig.02-26

7. Press [F2 (STEP 

→

)]. You can return to the previous 

screen by pressing [F1 (STEP 

←

)].

8. Make the settings for the effects. Use [

], [

], 

[

], and [

] to move the cursor and the TIME/

VALUE dial to adjust each of the values. Press [F3 (FX 
A)] to make settings to EFFECT A (FX1/2); press [F4 (FX 
B)] to make settings to EFFECT B (FX3/4).

fig.02-27

9. Press [F2 (STEP 

→

)]. You can return to the previous 

screen by pressing [F1 (STEP 

←

)].

10. Select mixer channels to be output to the AUX bus. The 

AUX bus is useful for sending tracks to an external 

effects processor. Use [

], [

], [

], and [

] 

to move the cursor and the TIME/VALUE dial to adjust 
each of the values.

fig.02-28

11. Press [F2 (STEP 

→

)]. You can return to the previous 

screen by pressing [F1 (STEP 

←

)].

12. Select the Master Section settings. Use [

], [

], 

[

], and [

] to move the cursor and the TIME/

VALUE dial to adjust each of the values.

fig.02-29

13. Press [F4 (Exec)]. “EZ ROUTING Step Edit is finished!!” 

appears in the display.

fig.02-24a

 EZ Routing settings will override any existing 

mixer settings you have already made.

14. You can save your setup as an EZ Routing template, or 

Exit [F6 (EXIT)] to leave this display without saving. To 
save the setup, press [F3 (SAVE)]. The Routing Save 
screen appears in the display. Save the setup using the 
procedure described in “Saving an EZ Routing 
Template,” p. 123.

Cursor

Pan

Level

Track Channel

Effect Switch

Send Level

Send Pan

Cursor

AUX Switch

AUX Send Switch

AUX Send Pan/
Balance

Cursor

Input Channel

Track Channel

Monitor Select

Equalizer Mode

Direct Out

Effect Insert

CDR Recording 

Mode

Destination V-Track