Roland VS-1824 用户手册
119
Chapter 8 EZ Routing
Chapter 8
14. Select the Master Section settings.
Use [
], [
], [
], and [
] to move the
cursor and the TIME/VALUE dial to adjust each of the
values.
values.
fig.02-36
15. Press [F4 (Exec)]. “EZ ROUTING Step Edit is finished!!”
appears in the display.
fig.02-24a
WARNING:
EZ Routing settings will override any existing
mixer settings you have already made.
16. You can save your setup as an EZ Routing template, or
Exit [F6 (EXIT)] to leave this display without saving. To
save the setup, press [F3 (SAVE)]. The Routing Save
screen appears in the display. Save the setup using the
procedure described in “Saving an EZ Routing
Template,” p. 123.
save the setup, press [F3 (SAVE)]. The Routing Save
screen appears in the display. Save the setup using the
procedure described in “Saving an EZ Routing
Template,” p. 123.
Setting Up for Mastering Using
Step Editing
Step Editing
Select this when creating mixing down to create a final two-
track stereo master tracks for burning onto a CD-R. To cancel
the settings procedure, press [F6 (EXIT)].
track stereo master tracks for burning onto a CD-R. To cancel
the settings procedure, press [F6 (EXIT)].
1. Press [EZ ROUTING].
The EZ Routing icon appears in the display.
2. Press [F5 (Exec)]. If “Exec” does not appear in the display
above [F5], press [PAGE] until you see “Exec,” and then
press [F5 (Exec)].
press [F5 (Exec)].
fig.02-18
3. Press [F4 (Mstng)].
4. Specify which sources are to be output to the MIX bus.
Press the Input SELECT buttons and the Track SELECT
buttons for all mixer channels you want to include. Use
buttons for all mixer channels you want to include. Use
[
] and [
] to move the cursor and the TIME/
VALUE dial to select the V-Track you want to play back.
fig.02-25
5. Press [F2 (STEP
→
)].
Monitor Select
Equalizer Mode
Direct Out
Effect Insert
Track assigned to the MIX bus
Source assigned to the MIX bus
Source
Track
V-Track