Roland VS-1824 用户手册
180
Chapter 13 CD-RW and Mastering
Playing Back the Mastering
Tracks
Tracks
Here’s how you can verify the audio that was mixed down to
the mastering tracks. You will listen to the mastering tracks.
Tracks 1-16 themselves will not be played.
1. Press [PLAY (DISPLAY)].
2. Press [PAGE] so that [F6] indicates “M
→
***” (*** is either
Rec, Ply, or Off).
fig.2-11
3. Press [F6] until “M
→
Ply” appears above [F6].
Press [F6] once more to select this setting. The current
status of the mastering tracks is shown in the display.
status of the mastering tracks is shown in the display.
fig.2-12.e
4. Move to the location at which you started the mixdown.
5. Press [PLAY]. The mastering tracks will play back. Use
the master fader to adjust the volume to a comfortable
listening level.
At this time, the function buttons will perform the following
actions.
[F1 (ZOOM+)]
:
Enlarges the playlist display in the track direction (three
levels).
levels).
[F2 (ZOOM-)]
:
Reduces the playlist display in the track direction (three
levels).
levels).
[F3 (
←→
)]
:
Enlarges the playlist display in the time direction (five
levels).
levels).
[F4 (
→←
)]
:
Reduces the playlist display in the time direction (five
levels).
levels).
[F5 (WAVE)]
:
Displays the sound level (waveform) that is recorded in
the tracks.
the tracks.
6. When playback ends, press [STOP].
Off
Record wait Status
Playback Status
Signal flow (routing)
TR1
MASTER
MIX
Sw
MIX
L
R
Track 1–16
TR16-16
Mastering
Track
TR15-16
MASTER OUT
MONITOR OUT
MONITOR OUT