Roland VS-1824 用户手册
234
Chapter 18 CD-R Backup
Items Necessary for CD-R Backup
• VS-1824
• Blank CD-R (Compact Disc-Recordable) or CD-RW
(Compact Disc-Rewritable) disc
* You cannot use high-speed compatible
CD-RW discs. This mark is printed on
high-speed compatible CD-RW discs.
high-speed compatible CD-RW discs.
It is recommended to use CD-R discs from the following
manufacturers.
manufacturers.
Taiyo Yuden Co., TDK Co., Mitsui Chemicals Co.,
Mitsubishi Chemicals Inc., Ricoh Co.,Ltd,
Hitachi Maxell Ltd.
Mitsubishi Chemicals Inc., Ricoh Co.,Ltd,
Hitachi Maxell Ltd.
It is recommended to use CD-RW discs from the
following manufacturers.
following manufacturers.
Ricoh Co., Ltd, Mitsubishi Chemicals Inc.
Recommended CD-R/CD-RW discs (approved by Roland)
are shown in the owner's manual of the CD-R/RW drive.
are shown in the owner's manual of the CD-R/RW drive.
If you are using a VS-1824 that is not equipped
with an internal CD-RW drive, you will need to purchase a
separately available CD-RW drive (approved by Roland). For
instructions on connecting the drive, refer to “Connecting an
External CD-R/CD-RW Drive” (p. 194).
separately available CD-RW drive (approved by Roland). For
instructions on connecting the drive, refer to “Connecting an
External CD-R/CD-RW Drive” (p. 194).
Inserting a CD
1. Press the eject button and open a disc tray.
2. Pull out a disc tray.
3. Locate the position of center hole of CD at stopper of
CD-RW drive.
4. Press the CD downward. The CD will be locked by 3
clips of the stopper.
5. Press disc tray until it is locked in the VS-1824.
If a disc tray does not open
If the power is turned off with the disc still in the drive
(such as due to a power failure), the disc tray cannot be
opened by pressing the eject button. In this case, you can
insert a piece of wire to force the tray open.
(such as due to a power failure), the disc tray cannot be
opened by pressing the eject button. In this case, you can
insert a piece of wire to force the tray open.
It is strictly restricted to eject tray using emergency eject
hall during VS-1824 is operating. This is cause error of
software.
hall during VS-1824 is operating. This is cause error of
software.
1. Turn off the power of the VS-1824.
2. Insert a thin object such as a wire into the emergency
eject hole. The disc tray will open.
Emergency Eject Hole