Roland VS-1824 用户手册
235
Chapter 18 CD-R Backup
Chapter 18
CD-R Backup
1. Select the drive (internal IDE hard drive) containing the
source song to be backed up as the current drive.
2. Place a blank CD-R/CD-RW disc in the CD-R/CD-RW
drive.
For details refer to the column
3. Press [CD-RW/MASTERING].
4. Press [F4 (CDRBk)].
5. Press [
], [
], [
], and [
] to move the
cursor. Then use the TIME/VALUE dial to adjust each
settings.
settings.
fig.07-14
SOURSE SONG
Mark the songs you want to back up.
Use the TIME/VALUE dial to move the cursor to the
song you want to back up, and then press [F3 (MARK)].
song you want to back up, and then press [F3 (MARK)].
You can choose more than just one song to backup. By
pressing [F2 (ALL)], all songs will be marked for backup.
pressing [F2 (ALL)], all songs will be marked for backup.
Press [F1 (SelSg)] to display a directory of songs. From the
song directory, press [F1 (Back)].
song directory, press [F1 (Back)].
+Verify
If this is turned “On,” verification will be performed
after the dong data has been backed up, to check
whether or not the data was saved correctly.
after the dong data has been backed up, to check
whether or not the data was saved correctly.
* When backing up to a CD-R, we recommend that you also
execute +Verify to check whether the data was bask up
correctly.
correctly.
* Since +Verify checks the entire CD-R disc, the operation will
take a certain amount of time.
* If as a result of the “+Verify” operation you receive a warning
that was not written correctly, please make a backup on
another disc.
another disc.
CD Speed
x4:
The song will be written at quadruple speed
(706 kilobytes per second).
(706 kilobytes per second).
x2:
The song will be written at double speed (353
kilobytes per second).
kilobytes per second).
The available speeds will depend on the Roland-
approved CD drive connected to the VS-1824.
approved CD drive connected to the VS-1824.
If you are using a finalized CD-RW disc that contains
data, “Erase?” appears in the display. To erase the
existing data, press [ENTER/YES]. “Erase Disc” appears
and the contents of the CD-RW disc are erased. If you do
not wish to erase the data, press [EXIT/NO], and insert a
new disc.
data, “Erase?” appears in the display. To erase the
existing data, press [ENTER/YES]. “Erase Disc” appears
and the contents of the CD-RW disc are erased. If you do
not wish to erase the data, press [EXIT/NO], and insert a
new disc.