Roland VS-1824 用户手册
242
Chapter 19 Using a DAT Recorder (DAT Backup)
11. When the backup procedure is finished, “Please Stop
DAT” appears in the display. Stop the DAT recorder and
press [ENTER/YES].
press [ENTER/YES].
12. Press [PLAY (DISPLAY)] to return to the Playlist display.
Canceling the Recover Operation
You can cancel the recover operation by pressing [EXIT/NO]
during the recover. Also, when there is an error in song data
backed up on a tape, the recover operation is temporarily
halted. In such instances, you can choose whether to leave or
delete the unfinished song data recovered up to that point.
during the recover. Also, when there is an error in song data
backed up on a tape, the recover operation is temporarily
halted. In such instances, you can choose whether to leave or
delete the unfinished song data recovered up to that point.
* This procedure does not correct the drive error, but tries to
restore the song and save as much of the data as possible.
Depending on the location where the error occurred, some
noises may be generated, or settings for the mixer, tempo map,
and/or sync track may be lost.
Depending on the location where the error occurred, some
noises may be generated, or settings for the mixer, tempo map,
and/or sync track may be lost.
* Loud noises may damage your amplifier and speakers. Turn
down the headphones and master volume of the VS-1824 when
you check for errors in the song data.
you check for errors in the song data.
Canceling a DAT Recovery Operation
in Progress
in Progress
1. Press [EXIT/NO] during the DAT recovery.
Recovery is stopped, and “Delete Err Song?” (Delete the
song containing the error?) appears in the display.
song containing the error?) appears in the display.
2. If you would like to delete the problem song data that
stopped the recovery operation from the hard drive,
press [ENTER/YES]. If you would like to leave it
unchanged, even though recovery is not complete, press
[EXIT/NO].
press [ENTER/YES]. If you would like to leave it
unchanged, even though recovery is not complete, press
[EXIT/NO].
When an Error is Found in the Song
Data
Data
1. If an error is found in song data that was recovered with
the DAT Recover operation, “Recover Err Retry ?”—“An
error was found, retry the recovery?”—appears in the
display.
error was found, retry the recovery?”—appears in the
display.
2. If you want to recover the data, press [ENTER/YES].
If you want to cancel the recovery, press [EXIT/NO].
3. If you press [EXIT/NO] in Step 2, “Delete Err Song ?”
appears in the display.
4. If you would like to delete the song data from the hard
drive, press [ENTER/YES]. If you would like to keep it
as is even though the error is included, press [EXIT/NO].
as is even though the error is included, press [EXIT/NO].
Checking DAT Tape Contents
This operation lets you view the names of songs saved to a
DAT tape. Even if you have saved the data of two or more
songs in a single backup operation, you can check the name
of each song.
DAT tape. Even if you have saved the data of two or more
songs in a single backup operation, you can check the name
of each song.
1. Connect the VS-1824 and the DAT recorder as shown
below.
fig.09-06c
fig.09-06d
DAT recorder
Digital Out
Optical
DAT recorder
Digital Out
Coaxial