Manualsbrain.com
  1. 份说明书
  2. 个品牌
  3. Roland
  4. VS-1824
  5. 用户手册

Roland VS-1824 用户手册

下载
页码 共 295
87
Chapter 6 Mixer Channel Strip Detail
Chapter 6
[F2 (FX2)] Effect 2 Send
Channel settings for the EFFECT 2 Bus. Sets the Effect Send 
Switch, the Send Level (0-127) and panning.
Sw (Effect Send Switch)
Switches the channel to the EFFECT bus.
Off:
The channel is not sent to the EFFECT bus.
Pre:
The signal is sent to the EFFECT bus before it passes 
through the mixer fader.
Post:
The signal is sent to the EFFECT bus after it passes 
through the mixer fader.
Level
Sets the send level (0-127) of the signal sent to the EFFECT 2 
Bus.
Panning
Sets the panning (L63-R63) of the signal sent to the EFFECT 2 
Bus.
[F3 (FX3)] Effect 3 Send
Channel settings for the EFFECT 3 Bus. Sets the Effect Send 
Switch, the Send Level (0-127) and panning.
Sw (Effect Send Switch)
Switches the channel to the EFFECT bus.
Off:
The channel is not sent to the EFFECT bus.
Pre:
The signal is sent to the EFFECT bus before it passes 
through the mixer fader.
Post:
The signal is sent to the EFFECT bus after it passes 
through the mixer fader.
Level
Sets the send level (0-127) of the signal sent to the EFFECT 3 
Bus.
Panning
Sets the panning (L63-R63) of the signal sent to the EFFECT 3 
Bus.
[F4 (FX4)] Effect 4 Send
Channel settings for the EFFECT 4 Bus. Sets the Effect Send 
Switch, the Send Level (0-127) and panning.
Sw (Effect Send Switch)
Switches the channel to the EFFECT bus.
Off:
The channel is not sent to the EFFECT bus.
Pre:
The signal is sent to the EFFECT bus before it passes 
through the mixer fader.
Post:
The signal is sent to the EFFECT bus after it passes 
through the mixer fader.
Level
Sets the send level (0-127) of the signal sent to the EFFECT 4 
Bus.
Panning
Sets the panning (L63-R63) of the signal sent to the EFFECT 4 
Bus.
[F5 (AUX)] AUX Send
Channel settings for the AUX Bus. Sets the AUX Send Switch, 
the Send Level (0-127) and panning.
Sw (Effect Send Switch)
Switches the channel to the AUX bus.
Off:
The channel is not sent to the AUX bus.
Pre:
The signal is sent to the AUX bus before it passes 
through the mixer fader.
Post:
The signal is sent to the AUX bus after it passes through 
the mixer fader.
Level
Sets the send level (0-127) of the signal sent to the AUX Bus.
Panning
Sets the panning (L63-R63) of the signal sent to the AUX Bus.
If you are not using VS8F-2 Effect Expansion Boards, the 
Effect Send parameters will be replaced with additional AUX 
send busses.