Roland VS-1824 用户手册
91
Chapter 6 Mixer Channel Strip Detail
Chapter 6
Low
This adjusts the gain (-12 dB to +12 dB) and the shelving
frequency (40 Hz-1.5 kHz) of the low-band EQ.
frequency (40 Hz-1.5 kHz) of the low-band EQ.
Mid
This adjusts the gain (-12 dB to +12 dB) and the center
frequency (200 Hz-8 kHz), and the Q (filter sharpness) (0.5-
16) of the mid-band EQ. The Mid band is not available when
“2 Band EQ” is selected.
frequency (200 Hz-8 kHz), and the Q (filter sharpness) (0.5-
16) of the mid-band EQ. The Mid band is not available when
“2 Band EQ” is selected.
High
This adjusts the gain (-12 dB to +12 dB) and the shelving
frequency (500 Hz-18 kHz) of the high-band EQ.
frequency (500 Hz-18 kHz) of the high-band EQ.
ENTER Button
When the cursor is positioned inside the EQ section, the
ENTER button will be blinking. Press [ENTER] to view a
graphic display of the EQ settings.
ENTER button will be blinking. Press [ENTER] to view a
graphic display of the EQ settings.
[F5 (V.Trk)] V-Track Select
Selects the V-Track (1-16) for playback or recording. The
V-Track setting is only available in the Track Mixer. The
VS-1824 must be stopped before this value can be changed. A
small box indicates that a recording has been made on the
V-Track. A flat line indicates the V-Track has not yet been
recorded.
V-Track setting is only available in the Track Mixer. The
VS-1824 must be stopped before this value can be changed. A
small box indicates that a recording has been made on the
V-Track. A flat line indicates the V-Track has not yet been
recorded.
[F6 (PRM.V)] Parameter View/
[F6 (CH.V)] Channel View
[F6 (CH.V)] Channel View
Changes the display from Channel View to Parameter View.
Press [F6 (PRM.V)] to view the Parameter settings (such as
Pan or Effect Send) for all channels. Press [F6 (CH.V)] to view
the entire mixer settings for just one channel.
Press [F6 (PRM.V)] to view the Parameter settings (such as
Pan or Effect Send) for all channels. Press [F6 (CH.V)] to view
the entire mixer settings for just one channel.
[F1(FX1)] Effect 1 Send
Channel settings for the EFFECT 1 Bus. Sets the Effect Send
Switch, the Send Level (0-127) and panning.
Switch, the Send Level (0-127) and panning.
Sw (Effect Send Switch)
Switches the channel to the EFFECT bus.
Off:
The channel is not sent to the EFFECT bus.
Pre:
The signal is sent to the EFFECT bus before it passes
through the mixer fader.
through the mixer fader.
Post:
The signal is sent to the EFFECT bus after it passes
through the mixer fader.
through the mixer fader.
Level
Sets the channel’s send level (0-127)to the EFFECT 1 Bus.
Panning
Sets the channel’s panning (L63-R63) in the EFFECT 1 Bus.
[F2 (FX2)] Effect 2 Send
Channel settings for the EFFECT 2 Bus. Sets the Effect Send
Switch, the Send Level (0-127) and panning.
Switch, the Send Level (0-127) and panning.
Sw (Effect Send Switch)
Switches the channel to the EFFECT bus.
Off:
The channel is not sent to the EFFECT bus.
Pre:
The signal is sent to the EFFECT bus before it passes
through the mixer fader.
through the mixer fader.
Post:
The signal is sent to the EFFECT bus after it passes
through the mixer fader.
through the mixer fader.
Level
Sets the channel’s send level (0-127) to the EFFECT 2 Bus.
Panning
Sets the channel’s panning (L63-R63) in the EFFECT 2 Bus.
[F3 (FX3)] Effect 3 Send
Channel settings for the EFFECT 3 Bus. Sets the Effect Send
Switch, the Send Level (0-127) and panning.
Switch, the Send Level (0-127) and panning.
Sw (Effect Send Switch)
Switches the channel to the EFFECT bus.
Off:
The channel is not sent to the EFFECT bus.
Pre:
The signal is sent to the EFFECT bus before it passes
through the mixer fader.
through the mixer fader.
Post:
The signal is sent to the EFFECT bus after it passes
through the mixer fader.
through the mixer fader.
Level
Sets the channel’s send level (0-127) to the EFFECT 3 Bus.
Panning
Sets the panning (L63-R63) of the channel to the EFFECT 3
Bus.
Bus.