Roland VS-1824 用户手册
95
Chapter 6 Mixer Channel Strip Detail
Chapter 6
[F3 (Solo)] SOLO
Use this to turn the SOLO function on and off for a mixer
channel.
channel.
[F4 (Mute)] MUTE
Use this to turn the MUTE function on and off for a mixer
channel.
channel.
[F5 (Fader)] FADER
Controls the level (0-127) of the signal.
Master Block
The following functions are found in the Master Block
section of the mixer. Press [EDIT/SOLO] to view and adjust
the settings of the Master Block. Press the function button
located under the display corresponding to the setting you
wish to change. Or, press [
section of the mixer. Press [EDIT/SOLO] to view and adjust
the settings of the Master Block. Press the function button
located under the display corresponding to the setting you
wish to change. Or, press [
], [
], [
], and [
]
to move the cursor to the setting you wish to change. Use the
TIME/VALUE dial to select the desired value.
TIME/VALUE dial to select the desired value.
If you adjust the pan while sound is playing, you may notice
“blips” in the sound. This is not a malfunction. If you find it
annoying, adjust the pan when the sound is not playing.
“blips” in the sound. This is not a malfunction. If you find it
annoying, adjust the pan when the sound is not playing.
[F1 (MST)] MASTER
Adjusts the level and balance of the master mix.
Level
This adjusts the volume level (0-127) for the MASTER OUT
jacks. This is normally adjusted using the Master fader.
jacks. This is normally adjusted using the Master fader.
Balance
This adjusts the left-right balance (L63-R63) for the MASTER
OUT jacks.
OUT jacks.
[F2 (MON)] MONITOR
Adjusts the level and balance of the Monitor mix.
Level
This adjusts the volume level (0-127) for the MONITOR jack.
This is normally adjusted using the MONITOR knob on the
top panel.
This is normally adjusted using the MONITOR knob on the
top panel.
Balance
This adjusts the left-right balance (L63-R63) for the
MONITOR jacks.
MONITOR jacks.
[F3 (AUX.A)] AUX A
This selects the signal to be assigned to the AUX A jacks.
FX1:
The signal at the EFFECT 1 bus.
FX2:
The signal at the EFFECT 2 bus.
AUX1/FX3:
The signal at the AUX1 bus, or, when a second VS8F-2 Effect
card is installed in the VS-1824, the EFFECT 3 bus.
card is installed in the VS-1824, the EFFECT 3 bus.
AUX2/FX4:
The signal at the AUX2 bus, or, when a second VS8F-2 Effect
card is installed in the VS-1824, the EFFECT 4 bus.
card is installed in the VS-1824, the EFFECT 4 bus.
AUX3/AUX:
The signal at the AUX3 bus, or, when a second VS8F-2 Effect
card is installed in the VS-1824, the AUX bus.
card is installed in the VS-1824, the AUX bus.