Roland SPD-S 用户手册

 

Gain

50%–400%

Specify the gain applied to the original wave.

Mode

MONO,
STEREO

Select MONO or STEREO for the wave. If you select stereo, the wave has two voices.

Grade

LONG,
STANDARD,
FINE

Specify the grade of the wave.

LONG: produces a poorer sound quality than that of STANDARD, but consumes half the 

memory space that STANDARD uses.

STANDARD: produces standard sound quality.
FINE: produces the highest sound quality but consumes double the memory space used by 

STANDARD. Two voices are used in this grade.

Dst
(Destina-
tion)

 

001–399,

 

001–500

Specify the wave number to which a created wave is to be saved.

 

001–399: To the internal memory

 

001–500: To the memory card

* By pressing [CARD], you can select the top number of the internal memory or of the mem-

ory card.

* If you press [SHIFT] and [FUNC], a new (empty) wave number is selected

 

Remain

Displays the duration for which new sampling is possible (the remaining time). The duration varies depending on 
the Mode and the Grade. This value is for indication only.

* The duration is indicated in units of minutes (m) and seconds (s) while [FUNC] is depressed in the parameter 

setting.

If you hold down [SHIFT] and press [FUNC], the parameter is reset to its initial value.

SPDS_e.book 66 ページ ２００４年４月１９日　月曜日　午前９時５８分