Roland SPD-S 用户手册
67
Chapter 6
Chapter 6 Using a CompactFlash
Memory Card
This chapter explains how to use a CompactFlash memory card.
■
Regarding Recommended CompactFlash Cards
See the leaflet (Recommended CompactFlash) that comes with the product.
Formatting a CompactFlash Card
1
To insert a CompactFlash card, carefully open the card slot cover (left-
hand side of the SPD-S).
2
Select patch mode or wave mode.
3
Press [SHIFT] and [SETUP] (CARD UTIL).
If no CompactFlash card has been inserted, “no card!” is indicated and the SPD-S returns to the
original mode.
original mode.
4
Press the PAGE buttons to select “CARD FORMAT,” then press
[ENTER].
When the CompactFlash card is unformatted, only "CARD FORMAT" is displayed.
5
A “[>] to format.” indication appears. Press [>].
6
A “format, sure?” indication is displayed. Press [ENTER] to start
formatting.
While formatting is in progress, “now processing..” is displayed. Then, the SPD-S
returns to the original mode.
returns to the original mode.
* When the SPD-S is powered on, do not remove the CompactFlash card before the
shutdown operation (p. 23). Doing so may corrupt the SPD-S’s data or the data on
the CompactFlash card.
the CompactFlash card.
* Carefully insert the CompactFlash card all the way in-until it is firmly in place.
All data on the Compact Flash
card will be erased as the
result of formatting it.
card will be erased as the
result of formatting it.
Press [PATCH] to select the
patch mode, or press [WAVE]
to select wave mode.
patch mode, or press [WAVE]
to select wave mode.
Do not change or delete any
files or folders that have been
generated in formatting the
CompactFlash cards, or the
SPD-S will fail to properly
recognize the card.
files or folders that have been
generated in formatting the
CompactFlash cards, or the
SPD-S will fail to properly
recognize the card.
SPDS_e.book 67 ページ ２００４年４月１９日 月曜日 午前９時５８分