Roland RD-700SX 用户手册
106
Connecting to Your Computer via USB (USB Mode)
If you want to power off the RD-700SX when it is connected to
your computer in Storage mode, you must first cancel USB
communication on your computer as described here.
your computer in Storage mode, you must first cancel USB
communication on your computer as described here.
Windows Me/2000/XP Users
1.
Use the device eject button shown in the taskbar at
the lower right of your computer screen to cancel the
connection with the RD-700SX.
the lower right of your computer screen to cancel the
connection with the RD-700SX.
Macintosh Users
1.
Make sure that the RD-700SX drive icon is not on
your desktop.
your desktop.
Driver Installation and Settings
In order to use the RD-700SX as a USB MIDI device from your
computer, you must first install the USB MIDI driver. The USB MIDI
driver is on the included “RD-700SX Driver CD-ROM.”
computer, you must first install the USB MIDI driver. The USB MIDI
driver is on the included “RD-700SX Driver CD-ROM.”
In order to use USB in MIDI mode, you must install the driver from
the included CD-ROM into your computer.
The correct driver and the installation procedure will depend on
your system and on the other programs you are using. Be sure to
read the Readme file on the CD-ROM before installation.
your system and on the other programs you are using. Be sure to
read the Readme file on the CD-ROM before installation.
Windows XP/2000
→
\W2kXP\Readme_E.htm
Windows Me/98/98SE
→
\W98Me\Readme_E.htm
Mac OS 9 (9.04 or later)
→
\Driver E (Mac OS 9)\Readme_e.htm
Mac OS X
→
\Driver (Mac OS X)\Readme_e.htm
When you install the USB MIDI Driver, set the RD-700SX to
“MIDI Mode”(p. 104).
“MIDI Mode”(p. 104).
Use a USB Cable no longer than 3 meters.
The USB driver to be used when a computer is connected to the USB
connector is determined as follows:
connector is determined as follows:
1.
Press [EDIT].
2.
Press CURSOR [
]/[
] to select “1. SYSTEM,” and
then press [ENTER].
3.
Press CURSOR [
]/[
] to switch screens, and press
CURSOR [
]/[
] to move the cursor to “USB Driver.”
4.
Press [INC]/[DEC] to set the value.
5.
After making the setting, turn off the power to the RD-
700SX, then turn it on again.
700SX, then turn it on again.
Canceling USB Communication
Exchanging MIDI Messages
with Your Computer
(MIDI Mode)
Caution when disconnecting the
USB cable
USB cable
You must shut down your computer before disconnecting the
USB cable. Disconnecting the cable while your computer’s
power is on may destabilize its operation.
USB cable. Disconnecting the cable while your computer’s
power is on may destabilize its operation.
Switching USB Drivers
Parameter
Value
Description
USB Driver
Original
Select this when using the sup-
plied driver with a USB connec-
tion.
plied driver with a USB connec-
tion.
Generic
Select this when using a generic
USB driver included with the OS
with a USB connection.
USB driver included with the OS
with a USB connection.
What is the USB MIDI Driver?
The USB MIDI Driver is a software which passes data between
the RD-700SX and the application (sequencer software, etc.) that
is running on the USB-connected computer.
the RD-700SX and the application (sequencer software, etc.) that
is running on the USB-connected computer.
The USB MIDI Driver sends data from the application to the
RD-700SX, and passes data from the RD-700SX to the
application.
RD-700SX, and passes data from the RD-700SX to the
application.
fig.23-001_50
Application
USB
Driver
Computer
USB connector
USB cable
USB connector
RD-700SX
RD-700SX_e.book 106 ページ ２００６年３月２３日 木曜日 午後２時５２分