Roland RD-700SX 用户手册
76
Making Detailed Settings for the ONE TOUCH Tones
You can make changes in tones by adjusting the settings of the
elements.
elements.
Decay Time Offset:
The time it is to take following the attack for the volume to decrease.
Cutoff Offset:
Adjusts how much the filter is opened.
Release Time Offset:
The time it takes after the key is released for a sound to become
inaudible.
inaudible.
With certain tones, the effect may be difficult to distinguish.
This restores the One Touch E. Piano settings to their initial
conditions.
conditions.
1.
In Step 3 of the Piano Edit settings instructions
(p. 73), select “5. Initialize” and press [ENTER].
(p. 73), select “5. Initialize” and press [ENTER].
To cancel the Initialize, press [EXIT].
2.
Press [ENTER].
The confirmation message appears.
3.
Press [ENTER] once again.
The ONE TOUCH [PIANO] tones are initialized.
You can make more detailed settings to fashion just the Tones you
want using the E.piano Tone selected by pressing ONE TOUCH
[E.PIANO] (p. 32).
want using the E.piano Tone selected by pressing ONE TOUCH
[E.PIANO] (p. 32).
This function is called “E.Piano Edit.”
The settings made in E.Piano Edit are stored to ONE TOUCH
[E.PIANO].
[E.PIANO].
When ONE TOUCH [E.PIANO] is pressed, all settings other
than the E.Piano Edit settings are switched to their status at the
time the RD-700SX’s power was turned on. Store any
arrangements of settings that you want to keep in Setup (p. 58).
than the E.Piano Edit settings are switched to their status at the
time the RD-700SX’s power was turned on. Store any
arrangements of settings that you want to keep in Setup (p. 58).
1.
Press [F1] in the ONE TOUCH [E.PIANO] screen to
select the type you want to set.
select the type you want to set.
2.
Press [F2].
fig.04-g07-1
3.
Press CURSOR [
]/[
] to switch screens, and
press CURSOR [
]/[
] to move the cursor to
the parameter to be set.
4.
Press [INC]/[DEC] to set the value.
5.
If you want to save the setting, press [F1 (WRITE)].
The confirmation message appears. Press [F1 (WRITE)] to save
the settings. If you want to cancel, press [EXIT].
the settings. If you want to cancel, press [EXIT].
6.
When you finish making settings, press [EXIT].
You are returned to the ONE TOUCH [E.PIANO] screen.
Changing Sound Characteristics
(Tone Modify)
Parameter
Value
Description
Decay Time
(Offset)
(Offset)
-64–+63
The time it takes for the volume to
fall increases as the value is raised;
lowering the value decreases the
decay.
fall increases as the value is raised;
lowering the value decreases the
decay.
Cutoff
(Offset)
(Offset)
Higher values brighten the sound;
lower values make the sound seem
darker.
lower values make the sound seem
darker.
Release
Time
(Offset)
Time
(Offset)
Higher values produce longer decay;
set lower values for a clear-cut
sound.
set lower values for a clear-cut
sound.
Restore the settings to initial
conditions (Initialize)
Making Detailed Settings
for the E.Piano Tones
(E.Piano Edit)
Making the settings
RD-700SX_e.book 76 ページ 2006年3月23日 木曜日 午後2時52分