Roland RD-700SX 用户手册
85
Detailed Settings for Each Function ([EDIT])
This setting determines the function of the pedal switches or
expression pedals (such as the optional EV series) that are connected
to the FC1 and FC2 jacks on the rear panel.
expression pedals (such as the optional EV series) that are connected
to the FC1 and FC2 jacks on the rear panel.
Normally, MULTI EFECTS [CONTROL] knob is used for making
settings that adjust the multi-effects (MFX1 Control), but they can
also be used for settings that change the way tones are played or the
tempo.
settings that adjust the multi-effects (MFX1 Control), but they can
also be used for settings that change the way tones are played or the
tempo.
This sets the function of the slider when [CONTROL/ZONE LEVEL]
is set to “CONTROL” (lit).
is set to “CONTROL” (lit).
Assigning Functions to Pedals
(FC1/FC2 Pedal Assign)
Parameter
Value
Function/Parameter Setting
Changed
Changed
FC1/FC2
(Pedal
Assign)
(Pedal
Assign)
OFF
No control
CC01–CC31,
CC33–CC95
CC33–CC95
Controller Numbers 1–31,
33–95
33–95
96:
BEND-UP
BEND-UP
Raises the pitch (up to a
maximum of four octaves).
maximum of four octaves).
97:
BEND-DWN
BEND-DWN
Lowers the pitch (up to a
maximum of four octaves).
maximum of four octaves).
98:
AFTER TOUCH
AFTER TOUCH
After Touch
99:
OCT-UP
OCT-UP
Each pedal press raises the key
range in octave steps (up to 4
octaves higher).
range in octave steps (up to 4
octaves higher).
100:
OCT-DOWN
OCT-DOWN
Each pedal press lowers the
key range in octave steps (up to
4 octaves lower).
key range in octave steps (up to
4 octaves lower).
101:
START/STOP
START/STOP
Starts/Stops the external
sequencer.
sequencer.
102:
TAP-TEMPO
TAP-TEMPO
The tempo will be modified to
the interval at which you press
the pedal.
the interval at which you press
the pedal.
103:
RHY PLY/STP
RHY PLY/STP
104:
ARPEGGIO SW
ARPEGGIO SW
105:
MFX ON/OFF
MFX ON/OFF
Performs the same function as
MULTI EFFECTS [ON/OFF].
Switches the multi-effects (p.
52) on and off.
MULTI EFFECTS [ON/OFF].
Switches the multi-effects (p.
52) on and off.
106:
MFX CONTROL
MFX CONTROL
Adjusts the amount of multi-
effects (p. 52).
effects (p. 52).
107:
SNG PLY/STP
SNG PLY/STP
Changing the MULTI EFFECTS
[CONTROL] Knob Settings
(Control Knob Assign)
Parameter
Value
Description
Ctrl Knob
(Control
Knob
Assign)
(Control
Knob
Assign)
OFF
No control
MFX1
CTRL
CTRL
MULTI EFECTS [CONTROL] knob
adjusts the MFX Control of MFX1
applied.
adjusts the MFX Control of MFX1
applied.
MFX2
CTRL
CTRL
MULTI EFECTS [CONTROL] knob
adjusts the MFX Control of MFX2
applied.
adjusts the MFX Control of MFX2
applied.
MFX1
&2 CTRL
&2 CTRL
MULTI EFECTS [CONTROL] knob
adjusts the MFX Control of MFX1 and
MFX2 applied.
adjusts the MFX Control of MFX1 and
MFX2 applied.
TEMPO
MULTI EFECTS [CONTROL] knob
changes the tempo.
changes the tempo.
Changing the Slider Settings
(Slider Assign)
Parameter
Value
Description
Slider Assign
(UP1/UP2/
LW1/LW2)
(UP1/UP2/
LW1/LW2)
OFF
No control
CC01–CC31,
CC33–CC95
CC33–CC95
Controller Numbers 1-31, 33-
95
95
96:
BEND-UP
BEND-UP
Raises the pitch in semitone
units (up to a maximum of
four octaves).
units (up to a maximum of
four octaves).
97:
BEND-DOWN
BEND-DOWN
Lowers the pitch in semitone
units (up to a maximum of
four octaves).
units (up to a maximum of
four octaves).
98:
AFTER TOUCH
AFTER TOUCH
After Touch
RD-700SX_e.book 85 ページ ２００６年３月２３日 木曜日 午後２時５２分