Roland RD-700SX 用户手册

 

This settings determine the part to which the MFX1 are applied.

 

Select the Multi-Effects Type.

There are 125 different multi-effects available. Refer to the Effect/
Parameter List (p. 112).

 

When MFX Source is set to UPPER1, UPPER2, LOWER1, or 
LOWER2, the Tone Info MFX Type settings (p. 71) also change.

 

You can make changes to the multi-effect parameters in real time 
with the MULTI EFFECTS [CONTROL] knob. Here, select the 
parameter to be changed.

The parameters that can be changed vary with the different multi-
effects selected in Type.

The available choices depend on the Type setting.

 

You can make even more detailed settings to the multi-effects. When 
you select the multi-effects Type, a number of parameters particular 
to that type are displayed. Refer to the 

 

 

Multi-effects are not applied to parts in which the Part 
Parameter MFX Switch is set to “OFF.”

 

With some types of multi-effects, lowering the volume of the 
Part to which the multi-effects are added may end up changing 
the amount of the effect applied. In such cases, adjust the Level 
in MFX parameters.

 

Use caution before setting the Feedback parameter to its 
maximum or minimum values, since such settings may cause 
the sound to play continuously.

Reverb adds the reverberation characteristics of halls or 
auditoriums. Six different types are offered, so you can select and 
use the type that suits your purpose.

 

You can set the amount of reverb applied separately for each 
individual tone (p. 71).

 

Select the reverb type.

When you change the Reverb Type, the Reverb parameters will be 
automatically adjusted to the optimal values. Rather than setting the 
reverb parameters one by one, you can make the settings more easily 
by first setting the Reverb Type and then changing only the 
necessary parameters.

The way the [REVERB] indicators light changes with the selected 
type.

 

You can make even more detailed reverb settings.

When you select a Reverb Type, a number of parameters unique to 
that type are displayed. Refer to p. 145 for the values that can be set.

 

MFX Dest 
(Destination)

SOURCE 
PART

The multi-effect is applied only to 
the part selected in MFX1 Source.

SAME 
MFX

The multi-effect is applied to parts 
assigned the same multi-effect as the 
part selected in MFX1 Source.

ALL PART

The multi-effects are applied to all 
parts.

 

Type

 

 

C1/2 (MFX Control)

 

 

Reverb Type

OFF

No reverb is used.
The indicator does not light.

REVERB

Normal Reverb. 
The “HALL” indicator flashes.

ROOM

Simulates the reverberation of 
room interiors. It produces a 
well-defined and spacious 
reverberation. 
The “ROOM” indicator remains 
lit.

HALL

Simulates the reverberation 
exhibited by hall. It provides a 
deeper reverberation than the 
Room reverbs. 
The “HALL” indicator remains 
lit.

PLATE

Simulates a plate reverb unit (a 
type of artificial reverb that 
utilized a metal plate). The 
“ROOM” indicator flashes.

GM2 REVERB

This is a GM2 reverb.
The “CATHEDRAL” indicator 
flashes.

CATHEDRAL

This reproduces the reverb 
found in a church cathedral.
The “CATHEDRAL” indicator 
remains lit.

RD-700SX_e.book 87 ページ ２００６年３月２３日　木曜日　午後２時５２分