Roland BR-900CD 用户手册

215

Error Messages

Section 9

Not Available in Mastering Mode!

Cause:

You cannot carry out this operation with
“MASTERING” selected as the recording mode.

Solution:

First press the [REC MODE] button to switch
the recording mode to “INPUT” or “BOUNCE,”
then proceed with the operation.

Not Blank Disc!

Cause:

The CD-R/RW disc already has data written to it.

Solution:

Place a CD-R/RW disc with no data written to it
(a blank disc) in the CD-R/RW drive.
If using a CD-RW disc, you can erase the data on
the disc in order to create a blank disc (p. 153).

Not CD-RW Disc!

Cause:

The disc is not a CD-R/RW disc, so the data
cannot be erased.

Solution:

Use a CD-RW disc.

Not Finalized Disc!

Cause:

The disc cannot be played back properly
because it has not been finalized.

Solution:

Finalize the disc (p. 143).

Power Down!

Cause:

Internal power source voltage is below than
guaranteed workable range.

Solution:

In case of using PSC adaptor:
Cable might be broken or adaptor itself might
be malfunctioning. Please contact Roland
Service or Roland authorized dealers.

In case of using batteries:
Please replace with new batteries (p. 23).

Protected!

Cause:

You are attempting to write data to a song that
has protection switched on.

Solution:

To write data to the song, switch Protect to OFF
(p. 79).

Set Bounce Target to Track!

Cause:

You cannot use the Rhythm-related functions
(switching Arrangement/Pattern/Off, editing,
switching Rhythm pads, Tone Load) when a
CD is specified as the bounce destination.

Solution:

When using Rhythms, specify a track as the
bounce destination.

Set the Repeat!

Cause:

Repeat A (Starting Point) and B (Ending Point)
is not set.

Solution:

Set the Repeat A and B (p. 51).

Stop P.Trainer!

Cause:

The operation you attempted cannot be done
while the Phrase Trainer (p. 192) is operating.

Solution:

Press [PHRASE TRAINER] to turn off the
Phrase Trainer.

Stop Recorder!

Cause:

The operation you attempted cannot be done
while the recorder is running (playing or
recording).

Solution:

Press [STOP] to stop playback or recording.

Too Many Songs!

Cause:

You are attempting to create more that 100 songs.

Solution:

Erase unneeded songs (p. 77).

Unformatted!

Cause:

The Memory card is not formatted by DOS.

Solution 1: Turn off the BR-900CD, properly insert the

memory card, then turn the BR-900CD back on.

Solution 2:

Initialize the card (p. 196).

Unsupported Card!

Cause:

The memory card (CompactFlash) or
MicroDrive inserted is not compatible with the
BR-900CD.

Solution:

Use a memory card compatible with the BR-
900CD (32 MB to 1 GB CompactFlash with a
power-source voltage of 3.3 V).

Unsupported Format!

Cause 1:

The BR-900CD cannot recognize or use the
format of the inserted memory card.

Solution 1: Insert a memory card initialized for use with the

BR-900CD (p. 196).

Cause 2:

You have attempted to load an incompatible
WAV or AIFF file or SMF to the BR-900CD.

Solution 2:

Check the format of the WAV or AIFF file or SMF.

Use AC Adaptor!

Cause:

You have attempted to use the CD-R/RW drive
while running on battery power.

Solution:

You cannot use the CD-R/RW drive while the
BR-900CD is powered by the batteries. If you
want to use the CD-R/RW drive, first save the
song, turn off the power to the BR-900CD,
connect the AC adaptor, then turn the power
back on.

Wrong Disc!

Cause:

A disc other than the required CD-R/RW disc
is placed in the drive.

Solution:

Place a CD-R/RW disc in the drive.