Roland BR-900CD 用户手册

*

This message is transmitted according to a SMF data regardless of the followings when
the data is played.

■Channel Voice Message
●Note On

If the MIDI parameter “RhyMIDI ch” is set to “1–16,” note numbers/velocities
corresponding to the Rhythm pattern will be transmitted on the MIDI channel that is
specified for the Rhythm.

Status

Second

Third

9nH

mmH

llH

n = MIDI Channel No.:

0H - FH (ch.1 - ch.16)

mm = Note No.:

00H - 7FH (0 - 127)

ll = Velocity:

01H - 7FH (1 - 127) 

●Note Off

If the MIDI parameter “RhyMIDI ch” is set to “1–16,” note numbers corresponding to the
Rhythm pattern will be transmitted on the MIDI channel specified for the Rhythm.

Status

Second

Third

8nH

mmH

llH

n = MIDI Channel No.:

0H - FH (ch.1 - ch.16)

mm = Note No.:

00H - 7FH (0 - 127)

ll = Velocity:

40H (64) 

❍Notes sounded by the Rhythm correspond to note numbers as follows.

Rhythm Tone

Note Number

Cross Stick 

G 1  (31)

Metronome (click) 

A 1  (33)

Metronome (bell) 

A#1 (34)

Kick C 

2 

(36)

Snare D 

2 

(38)

Tom 4

F 2  (41)

Closed hi-hat 

F#2  (42)

Tom 3

A 2  (45)

Open hi-hat 

A#2  (46)

Tom 2

C 3   (48)

Crash cymbal 

C#3  (49)

Tom 1

D 3  (50)

Ride cymbal 

D#3  (51)

Cowbell G#3 

(56)

■System Common Messages
●MIDI Time Code Quarter Frame Messages

If the Sync parameter “Sync Gen” is set to “MTC,” quarter frame messages of the time code
type specified by “MTC Type” will be transmitted when the BR-900CD is running
(recording or playing). The transmitted time counts are summed to “SMPTE (MTC) Offset
Time” as the song top is “00:00:00:00”.

Status

Second

F1H

mmH (= 0nnndddd)

nnn = Message type:

0 = Frame count LS nibble
1 = Frame count MS nibble
2 = Seconds count LS nibble
3 = Seconds count MS nibble
4 = Minutes count LS nibble
5 = Minutes count MS nibble
6 = Hours count LS nibble
7 = Hours count MS nibble

dddd = 4 bit nibble data: 

0h - FH (0 - 15)

Bit Field is assigned as follows.

Frame Count

xxxyyyyy
xxx

Reserved (000)

yyyyy

Frame No. (0-29)

Seconds Count 

xxyyyyyy
xx

Reserved (00)

yyyyyy

Seconds (0-59)

Minutes Count

xxyyyyyy
xx

Reserved (00)

yyyyyy

Minutes (0-59)

Hours Count

xyyzzzzz
x

Reserved (0)

yy

Time Code type

*

The time code types defined by the MIDI specification correspond to the BR-900CD Sync
parameter “MTC Type” as follows.

MIDI specification setting

“MTC Type” setting

0 = 24 Frames/Sec

24

1 = 25 Frames/Sec

25

2 = 30 Frames/Sec (Drop Frame)

29D

3 = 30 Frames/Sec (Non Drop Frame)

29N or 30

zzzzz   Hours    (0–23)

●Song Position Pointer

The current position is transmitted by the Song Position Pointer Message when the BR-
900CD is stopped, or the locate operation has been performed, if the SYNC parameter “Sync
Gen” is set to “MCK.”

Status

Second

Third

F2H

mmH

nnH

mm (LSB), nn (MSB) = Song Position Point: 00H 00H - 7FH 7FH

■System Realtime Message

Transmitted when “Sync Gen” is “MCK” in the SYNC parameter.

●Timing Clock

Status
F8H

●Active Sensing

Status
FEH

*

This is transmitted at intervals of approximately 200 msec.

●Start

Status
FAH

●Continue

Status
FBH

●Stop

Status
FCH