Roland DR-3 用户手册
53
Chapter 5 Changing the Overall Tone of the Sound and Acoustics (TSC)
Ch
ap
ter
ap
ter
5
Changing the Sound Shape
Parameters
Parameters
You can store up to eight edited Sound Shape
parameters.
parameters.
*
Unable to change the settings for the Preset Sound Shape,
with a “P” appended to their number.
with a “P” appended to their number.
*
When the unit left the factory, the User settings (U1–U8)
contained the same settings as the Preset (P1–P8).
contained the same settings as the Preset (P1–P8).
*
If the parameters below are changed during the
performance of a style or song, the changes are nullified
when you press [EDIT], restoring the settings for the
currently selected style or song.
- Key Shift value (p. 42)
- Tempo value (p. 41)
- Sound Shape and Ambience values (p. 51, p. 52)
performance of a style or song, the changes are nullified
when you press [EDIT], restoring the settings for the
currently selected style or song.
- Key Shift value (p. 42)
- Tempo value (p. 41)
- Sound Shape and Ambience values (p. 51, p. 52)
*
Certain data cannot be changed while it is being performed.
First stop the performance, then make the changes.
First stop the performance, then make the changes.
■ How to Make the Settings
1. With the performance stopped, press [EDIT].
The Edit Menu screen appears.
fig.09-23d
2. Press [
], select a <SOUND SHAPE>,
then press [ENTER].
fig.09-24d
3. Turn the VALUE dial to select the Sound
Shape number to be set.
4. Press [
] [
], select the parameter to
be set.
5. Turn the VALUE dial to set the value.
6. When you have finished making the
setting, press [EXIT] a number of times
until you exit Edit mode.
until you exit Edit mode.
■ Changing the Equalizer Parameters
This changes the parameters of the Sound Shape
3-Band equalizer.
3-Band equalizer.
The values that can be set for each of the
parameters are shown below.
parameters are shown below.
(*1) The “EQ (Low) / Q” and “EQ (High) / Q” is disabled
when “Shelving” (shelving type equalization) is selected
for the “EQ (Low) /Type” or “EQ (High) / Type.”
for the “EQ (Low) /Type” or “EQ (High) / Type.”
Parameter
Value
Description
EQ / Switch OFF, ON
This parameter turns the
equalizer effect on/off.
equalizer effect on/off.
EQ /
Input
Input
-24 dB–
+12 dB
+12 dB
Sets the overall volume be-
fore passing through the
equalizer.
fore passing through the
equalizer.
EQ (Low) /
Type
Type
Shelving,
Peaking
Peaking
Sets the equalizer type
(shelving, peaking) for the
lower range.
(shelving, peaking) for the
lower range.
EQ (Low) /
Gain
Gain
-12 dB–
+12 dB
+12 dB
Sets the amount of boost or
cut in the lower range.
cut in the lower range.
EQ (Low) /
Freq
Freq
20 Hz–
2.0 kHz
2.0 kHz
Sets the center frequency
for the lower range.
for the lower range.
EQ (Low) /
Q (*1)
Q (*1)
0.3–16.0
Sets the steepness of the fre-
quency response curve for
the lower range’s center
frequency.
quency response curve for
the lower range’s center
frequency.
EQ (Mid) /
Gain
Gain
-12 dB–
+12 dB
+12 dB
Sets the amount of boost or
cut in the middle range.
cut in the middle range.
EQ (Mid) /
Freq
Freq
20 Hz–
8.0 kHz
8.0 kHz
Sets the center frequency
for the middle range.
for the middle range.
EQ (Mid) /
Q
Q
0.3–16.0
Sets the steepness of the fre-
quency response curve for
the middle range’s center
frequency.
quency response curve for
the middle range’s center
frequency.
EQ (High) /
Type
Type
Shelving,
Peaking
Peaking
Sets the equalizer type
(shelving, peaking) for the
upper range.
(shelving, peaking) for the
upper range.
EQ (High) /
Gain
Gain
-12 dB–
+12 dB
+12 dB
Sets the amount of boost or
cut in the upper range.
cut in the upper range.
EQ (High) /
Freq
Freq
500 Hz–
14.0 kHz
14.0 kHz
Sets the center frequency
for the upper range.
for the upper range.
EQ (High) /
Q (*1)
Q (*1)
0.3–16.0
Sets the steepness of the fre-
quency response curve for
the upper range’s center
frequency.
quency response curve for
the upper range’s center
frequency.
EQ / Out
Level
Level
-24 dB–
+12 dB
+12 dB
Sets the overall volume lev-
el after equalization.
el after equalization.