Roland DR-3 用户手册
55
Chapter 5 Changing the Overall Tone of the Sound and Acoustics (TSC)
Ch
ap
ter
ap
ter
5
■ Naming the Settings
You can edit the name of the currently selected
Sound Shape setting, using up to six characters
for the name.
Sound Shape setting, using up to six characters
for the name.
fig.09-27d
Press [
] [
] to move to the point where you
want to enter the character(s).
Each time you press [ENTER], it switches
between upper and lower case for the text being
input.
between upper and lower case for the text being
input.
Turn the VALUE dial to select the character.
When you have finished making the setting,
press [EXIT] a number of times until you exit Edit
mode.
press [EXIT] a number of times until you exit Edit
mode.
■ Copying the Settings
Copy the currently selected Sound Shape setting
to the User settings (U1–U8).
to the User settings (U1–U8).
fig.09-28d
Turn the VALUE dial to select the number for the
Sound Shape to be copied, then press [
Sound Shape to be copied, then press [
].
fig.09-29d
Turn the VALUE dial to select the copy-
destination Sound Shape number, then press
[
destination Sound Shape number, then press
[
].
fig.09-30d
Press [ENTER] to execute the copy.
If you press [
], the copy is cancelled, and
you’re taken back to the screen you were in
immediately before that.
immediately before that.
When you have finished making the setting,
press [EXIT] a number of times until you exit Edit
mode.
press [EXIT] a number of times until you exit Edit
mode.