Roland DR-3 用户手册

Chapter 5 Changing the Overall Tone of the Sound and Acoustics (TSC)

■ Naming the Settings

Select a <NAME> on step 4 in p. 56, then press 
[ENTER].

You can edit the name of the currently selected 
Ambience setting, using up to six characters for 
the name.

fig.09-27d

Press [

] [

] to move to the point where you 

want to enter the character(s).

Each time you press [ENTER], it switches 
between upper and lower case for the text being 
input.

Turn the VALUE dial to select the character.

When you have finished making the setting, 
press [EXIT] a number of times until you exit Edit 
mode.

■ Copying the Settings

Select a <COPY> on step 4 in p. 56, then press 
[ENTER].

Copy the currently selected Ambience setting to 
the User settings (U1–U8).

fig.09-28d

Turn the VALUE dial to select the number for the 
Ambience to be copied, then press [

].

fig.09-29d

Turn the VALUE dial to select the copy-
destination Ambience number, then press [

].

fig.09-30d

Press [ENTER] to execute the copy.

If you press [

], the copy is cancelled, and 

you’re taken back to the screen you were in 
immediately before that.

When you have finished making the setting, 
press [EXIT] a number of times until you exit Edit 
mode.

Hi Damp / 
Freq

400 Hz–
16 kHz

This parameter adjusts the 
standard frequency at which 
the high-frequencies are 
damped. The reverb sound in 
the band above the standard 
frequency is damped.

Low Cut / 
Freq

20 Hz–
2.0 kHz

This parameter adjusts the 
frequency at which the low-
frequencies are cut.

High Cut / 
Freq

250 Hz–
14.0 kHz, 
FLAT

This parameter adjusts the 
frequency at which the low-
frequencies are cut. No effect 
occurs when set to “FLAT.”