Roland GW-7 用户手册

 

The GW-7 contains 657 different Tones. You can use these Tones in 
the three keyboard modes (Main, Split, Dual) (p. 9).

 

The Tone memory locations are organized as follows.

 

You can use SELECT [

][

] to step through the categories 

one by one.

 

If, after selecting a Preset tone, you press and hold down (for 
approximately two seconds) the category button in which that 
tone is registered, that tone will be selected first when you press 
the same button the next time. (You can't do this for User tones.)

 

In Split mode or Dual mode, you can select two Tones 
independently. (p. 10)

 

When [BACKING TRACK] is lit, the left-hand region of the 
keyboard will play a string sound and a chord bass sound. If 
you don't want these to play, press [BACKING TRACK] so the 
illumination is turned off.

 

The “

 

” function lets you register up to ten Tones 

to each of the ten category buttons [PIANO]–[DRUMS], 
regardless of the category of the Tone or whether it is a Preset 
Tone or a User Tone. For example, if you register the Tones you 
use most frequently, you’ll be able to select them quickly in a 
live performance situation.

After selecting a Tone, hold down [FAVORITE] and press the 
category button (one of the ten buttons [PIANO]–[DRUMS]) in 
which you want to register that Tone.

Press [FAVORITE] so the button is lit, and press the category button 
(one of the ten buttons [PIANO]–[DRUMS]) in which you registered 
the desired Tone.

The last 51 Tones (P607–P657) are called “drum sets.” When you 
select a drum set, a different sound is assigned to each note of the 
keyboard. For example, the left most key will play a bass drum (kick) 
sound, and other keys will play snare drum and other sounds. A 
drum set is a collection of ninety or more sounds, each assigned to a 
different key.

 

You can’t select a drum set for the Lower Part of Split mode, nor 
as the second Tone in Dual mode.

The GW-7 contains sound effect, drum, and percussion Tones (P543–
P606), and you can assign just one of these Tones to the keyboard 
and use it to play a melody. You can use these across the entire 
keyboard in Main, Split, or Dual modes.

 

If you’re using Split mode, you’ll probably want to set the split 
point to about 

 

 if you’re going to play a sound effect or 

percussion sound with your right hand, or to about 

 

 if you’re 

using your left hand.

You can shift the pitch of a Tone upward or downward in steps of an 
octave, over a maximum of four octaves upward or downward.

 

If [UPPER] is lit, hold down [SHIFT] and use OCTAVE [

][

] 

to change the octave setting of the Upper Part.
If [LOWER] is lit, this operation will change the octave setting of the 
Lower Part.

 

If [UPPER] is lit, hold down [SHIFT] and use OCTAVE [

][

] 

to change the octave setting of the first Tone.
If LOWER is lit, this operation will change the octave setting of the 
second Tone.

 

Preset

These Tones are built into the GW-7. 
They cannot be overwritten.

 

User

You can use these memory locations to 
store Tones you’ve edited. To switch to 
User Tones, press [USER] so the button 
is lit. To switch back to Preset Tones, 
press [USER] once again so its illumina-
tion is switched off.

 

 

 

 are only for 

 

.

GW-7_e.book 11 ページ ２００５年２月１６日　水曜日　午前８時４８分