Roland GW-7 用户手册
19
Performance Functions and Effects
The GW-7 contains built-in reverb, chorus, and multi-effect (MFX) processors. You can choose an effect type for each processor.
1.
Press ANALOG MODIFY [SELECT] so EFFECT is lit.
2.
Turn the C1 (REVERB) or C2 (CHORUS) knob.
Chorus is applied only if MFX is OFF.
1.
Press [EFFECTS].
2.
Use SELECT [
][
] to select a parameter, and turn the VALUE dial to edit its value.
3.
When you’re finished editing the effect settings, press [EFFECTS] or [EXIT] to return to the previous screen.
Using Effects
Adjusting the Reverb or Chorus Send Level
Editing the Effects
Parameter
Range
Explanation
MFX
Selects the type of multi-effect. It is memorized in each Tone.
*
*
MFX are not applied to the following three types of tones.
The lower part in Split mode
The second tone in Dual mode
Drum sets
The second tone in Dual mode
Drum sets
Tone MFX
OFF, ON
Normally you will leave this ON. Only one setting can be saved in the entire GW-7.
ON
: When you switch the Tone, the MFX will also change.
OFF
: The MFX will not change when you switch the Tone.
Chorus
OFF,
CHORUS 1–4,
FB CHORUS,
FLANGER,
SHORT DLY,
S DLY FB
CHORUS 1–4,
FB CHORUS,
FLANGER,
SHORT DLY,
S DLY FB
Selects the type of chorus. It is memorized in each Performance.
*
Chorus is applied only if MFX is OFF.
OFF
: Chorus will not be applied.
CHORUS 1–4
: These are typical chorus effects that add depth and spaciousness.
FB CHORUS
: A chorus that produces a flanger-like effect, and a mild tone.
FLANGER
: A metallic-sounding effect reminiscent of a jet airplane taking off and landing.
SHORT DLY
: Delays the sound, producing an echo effect.
S DLY FB
: A short delay will be repeated.
Cho Main
0–127
Adjusts the amount of chorus applied to the Main mode Tone, the Tone of the Upper Part in Split mode,
or the first Tone in Dual mode. It is memorized in each Tone.
or the first Tone in Dual mode. It is memorized in each Tone.
Cho Dual
0–127
Adjusts the amount of chorus applied to the second Tone in Dual mode. It is memorized in each Perfor-
mance.
mance.
Cho Split
0–127
Adjusts the amount of chorus applied to the Tone of the Lower Part in Split mode. It is memorized in each
Performance.
Performance.
Reverb
OFF,
ROOM 1–3,
HALL 1–2,
PLATE,
DELAY,
PAN DELAY
ROOM 1–3,
HALL 1–2,
PLATE,
DELAY,
PAN DELAY
Selects the type of reverb. It is memorized in each Performance.
OFF
: Reverb will not be applied.
ROOM 1–3
: These simulate the reverberation of a room. Higher-numbered settings simulate larger
rooms.
HALL 1–2
: These simulate the reverberation of a concert hall. Higher-numbered setting simulate larger
halls.
PLATE
: This is a digital simulation of a metal-plate reverb unit. It is particularly appropriate for percus-
sive sounds.
DELAY
: A delay effect (without reverb), producing a repeating echo.
PAN DELAY
: A delay sound is repeated, alternating between the left and right channels.
Rev Main
0–127
Adjusts the amount of reverb applied to the Main mode Tone, the Tone of the Upper Part in Split mode,
or the first Tone in Dual mode. It is memorized in each Tone.
or the first Tone in Dual mode. It is memorized in each Tone.
Rev Dual
0–127
Adjusts the amount of reverb applied to the second Tone in Dual mode. It is memorized in each Perfor-
mance.
mance.
Rev Split
0–127
Adjusts the amount of reverb applied to the Tone of the Lower Part in Split mode. It is memorized in each
Performance.
Performance.
GW-7_e.book 19 ページ ２００５年２月１６日 水曜日 午前８時４８分