Roland CDX-1 用户手册
110
Prepare for recording—Multitrack recording
What is multitrack recording?
The CDX-1 provides
eight “audio tracks”
that are used to independently record
and manage the parts that make up a song. You can record separate parts on each
audio track, for example recording the vocal on audio track 1 and the guitar on audio
track 2. The process of recording parts on separate audio tracks is called
audio track, for example recording the vocal on audio track 1 and the guitar on audio
track 2. The process of recording parts on separate audio tracks is called
multitrack
recording
.
Preparing a CD-RW disc for use —Format
If you wish to use a new CD-RW disc, you must prepare that CD-RW disc for use by
the CDX-1. This process is called
the CDX-1. This process is called
formatting
.
Preparing a new CD-RW disc for use
A message of “This is blank disc. Do you wont to format?” appears in the screen.
2. If you wish to format the disc, press [YES/ENTER].
fig.41-01
The CD-RW Format screen appears.
If you press [NO/EXIT], format will be
canceled.
canceled.
3. Make sure that the cursor is locates at the “Format Type” line.“
4. Turn the TIME/VALUE dial to select the format type.
●
Format Type:
FULL:
The entire data area of the disc will be physically erased to make it
completely blank. This will increase the reliability of a disc that has
been previously used by another device. Normally you should select
this. Approximately 20 minutes will be required.
completely blank. This will increase the reliability of a disc that has
been previously used by another device. Normally you should select
this. Approximately 20 minutes will be required.
STANDARD:
The data on the disc will merely be invalidated logically. Normally
you should select this. Approximately 10 minutes will be required.
you should select this. Approximately 10 minutes will be required.
5. Press CURSOR [
] to move the cursor to “Data Type” line.
6. Turn the TIME/VALUE dial to select the data type.
For details on data types, refer to the column “What is the data type?” on this page.
You must use high-speed compatible CD-RW discs!
fig.13-04
When performing multitrack recording,
you must use high-speed compatible
CD-RW discs that bear this logo.
It is not possible to perform multitrack recording using a CD-R disc or CD-RW disc
not compatible with high-speed write. It is not possible to format either.
not compatible with high-speed write. It is not possible to format either.
“Recommended CD-R/
CD-RW discs” (p. 19)
CD-RW discs” (p. 19)
The CDX-1 uses a sample rate
of 44.1 kHz. It is not possible to
change the sample rate.
of 44.1 kHz. It is not possible to
change the sample rate.
CDX-1 carries out the
followings when formatting
discs.
• Insert CD-RW disc to
followings when formatting
discs.
• Insert CD-RW disc to
improve preciseness of
writing.
writing.
• Reserve area for recording
• Reserve area to save data of
• Reserve area to save data of
pad/sequence.
Thus, it take sometime to
complete formatting.
complete formatting.