Roland CDX-1 用户手册
112
Prepare for recording—Multitrack recording
Erasing the entire contents of a CD-RW disc
Sometimes you may no longer need to keep the data that was saved on a CD-RW
disc, and would like to use the same CD-RW disc for a different performance. You
would also like to use the a CD-RW disc that was previously used by a computer.
disc, and would like to use the same CD-RW disc for a different performance. You
would also like to use the a CD-RW disc that was previously used by a computer.
In such cases, execute the Disc Format operation.
1. Press [UTILITY].
The Menu are displayed as icon.
fig.41-03
2. Press CURSOR [
] to select the
CD-R/RW Disc icon, and press
[YES/ENTER].
[YES/ENTER].
The CD-R/RW Disc Menu are displayed as
icon.
icon.
fig.41-03
3. Press CURSOR [
] to select the
CD-RW Disc Format icon.
4. Press [YES/ENTER].
fig.41-01
The CD-RW Format screen appears.
5. Make sure that the cursor is located at “Format Type” line.
6. Turn the TIME/VALUE dial to select the format type.
●
Format Type
FULL:
The entire data area of the disc will be physically erased to make it
completely blank. This will increase the reliability of a disc that has
been previously used by another device. Approximately 20 minutes
will be required.
completely blank. This will increase the reliability of a disc that has
been previously used by another device. Approximately 20 minutes
will be required.
STANDARD:
The data on the disc will merely be invalidated logically. Normally
you should select this. Approximately 10 minutes will be required.
you should select this. Approximately 10 minutes will be required.
7. Press CURSOR [
] to move the cursor to “Data Type” line.
8. Turn the TIME/VALUE dial to select the data type.
* It is not possible to change the data type while you are working on the song.
9. Press [YES/ENTER].
fig.41-01
A message of “Format OK?” appears in the
screen.
screen.
10. Press CURSOR [
] to select “OK”, and press [YES/ENTER].
The format is executed. When formatting is completed, the display will show a
message of “Completed.” and the Basic screen will reappear.
message of “Completed.” and the Basic screen will reappear.
If you press [YES/ENTER] to select “CANCEL”, the CD-RW Format screen will
reappear.
reappear.
11. Press [YES/ENTER] to return to the Basic screen.
• An unused CD-RW disc will
be formatted in
approximately ten minutes,
regardless of the format type
setting.
approximately ten minutes,
regardless of the format type
setting.
The contents of the
CD-RW disc that are erased
by the format operation
cannot be recovered.
by the format operation
cannot be recovered.
• After you execute format, it is
• While formatting, do not turn
off the power with
unplugging the AC adaptor.
unplugging the AC adaptor.
CDX-1 carries out the
followings when formatting
discs.
• Insert CD-RW disc to
followings when formatting
discs.
• Insert CD-RW disc to
improve preciseness of
writing.
writing.
• Reserve area for recording
• Reserve area to save data of
• Reserve area to save data of
pad/sequence.
Thus, it take sometime to
complete formatting.
complete formatting.