Roland CDX-1 用户手册

fig.front_e

Place the CD to be loaded on this tray.

This hole allows the disc tray to be opened in case of 
emergency.

➔ “If the disc tray does not open” (p. 36)

The jack and button marked by the ❋ symbol cannot be used.

fig.rpanel_e

Connect the supplied AC adaptor to this jack.

You must use only the included PSB-2U AC adaptor. Use of any 
other adaptor may cause overheating or malfunctions.

Wrap the cable around this hook so that the AC adaptor cable 
is not pulled out accidentally.

Connect the ground cable here.

In some cases, a Electric Guitar etc. is connected, the metallic part of 
the panel may sometimes feel rough and grainy. This is due to an 
infinitesimal electrical charge, which is absolutely harmless. 
However, if you are concerned about this, connect the ground 
terminal (see figure) with an external ground. When the unit is 
grounded, a slight hum may occur, depending on the particulars of 
your installation. If you are unsure of the connection method, contact 
the nearest Roland Service Center, or an authorized Roland 
distributor, as listed on the “Information” page.

Unsuitable places for connection
• Water pipes (may result in shock or electrocution)
•  Gas pipes (may result in fire or explosion)
• Telephone-line ground or lightning rod (may be dangerous in the 

event of lightning)