Roland CDX-1 用户手册

Make connections as shown in the diagram below. Before you begin making connections, be sure that the power of all 
equipment is turned off.

fig.15-01e

• To prevent malfunction and/or damage to speakers or other 

devices, always turn down the volume, and turn off the power on 
all devices before making any connections.

• The pin assignment for the XLR type 

connectors is as shown below. Before 
making any connections, make sure that 
this pin assignment is compatible with 
that of all your other devices.

• Howling could be produced depending 

on the location of microphones relative to speakers. This can be 
remedied by:

1. Changing the orientation of the microphone(s).
2. Relocating microphone(s) at a greater distance from speakers.
3. Lowering volume levels.

• To prevent the inadvertent disruption of power to your unit 

(should the plug be pulled out accidentally), and to avoid 
applying undue stress to the AC adaptor jack, anchor the power 
cord using the cord hook, as shown in the illustration.

fig.15-03

• Do not use identically numbered phone-type and XLR-type MIC 

jacks simultaneously.

• Please connect or disconnect the foot switch after you turn off the 

power.

Stereo Headphones

Electric Guitar
Electric Bass

Mica

Mica

Keyboard, Rhythm Machine, etc.

CD Player etc.

Audio Set etc.

Power amp

AC Adaptor

(PSB-2U)

Rhythm Machine etc.

Foot Switch (DP-2 etc.)

DAT/MD Recorder etc.