Roland FR-7/FR-5 用户手册
Editing sounds | TUNING parameters
38
r
FR-7/FR-5 V-Accordion
TUNING parameters
The parameters of the TUNING group apply to the entire FR-7/FR-5 and are not saved to a Set. The
FR-7/FR-5 remembers them, however, so that you may have to change them again to return to the fac-
tory default. See pages 35 and 37 for how to select and adjust the parameters.
Press [UP] and [DOWN] simultaneously to select the value that is indicated as “Default setting”.
FR-7/FR-5 remembers them, however, so that you may have to change them again to return to the fac-
tory default. See pages 35 and 37 for how to select and adjust the parameters.
Press [UP] and [DOWN] simultaneously to select the value that is indicated as “Default setting”.
Whenever you press [EXIT÷JUMP] after editing a Menu
parameter, the FR-7/FR-5 asks you whether you want
to save your changes:
parameter, the FR-7/FR-5 asks you whether you want
to save your changes:
“YES” is selected by default. To save your changes, pro-
ceed as described below. (If you don’t want to save
them, turn the [DATA÷ENTER] knob to select “NO”, then
press the [DATA÷ENTER] knob.)
To save your changes:
ceed as described below. (If you don’t want to save
them, turn the [DATA÷ENTER] knob to select “NO”, then
press the [DATA÷ENTER] knob.)
To save your changes:
(1) Press the [DATA÷ENTER] knob. The display now
responds with:
Note: The GLOBAL page shows all parameters that are saved to
the Global memory (there is only one such memory): the Mas-
ter Tune and Scale Tune parameters of the TUNING group (the
Transpose setting is never saved) as well as the SYSTEM and
MIDI groups.
the Global memory (there is only one such memory): the Mas-
ter Tune and Scale Tune parameters of the TUNING group (the
Transpose setting is never saved) as well as the SYSTEM and
MIDI groups.
(2) Press the [MENU÷WRITE] button to save your
changes. The display briefly shows a confirmation:
Note: If you selected “NO”, the edited Global settings will be
used until you switch off the FR-7/FR-5 (or change them
again).
used until you switch off the FR-7/FR-5 (or change them
again).
Note: The SCALE and TUNE settings are saved using a separate
WRITE routine (see below).
WRITE routine (see below).
(415.3~466.2, Default setting:
440.0) This parameter allows
you to change the FR-7/FR-5’s
overall tuning, which may be
necessary when you play with
acoustic instruments that cannot be tuned easily or if
you use a CD or cassette tape as accompaniment. The
factory default, “440.0Hz”, represents the reference
pitch used by all electronic musical instruments.
440.0) This parameter allows
you to change the FR-7/FR-5’s
overall tuning, which may be
necessary when you play with
acoustic instruments that cannot be tuned easily or if
you use a CD or cassette tape as accompaniment. The
factory default, “440.0Hz”, represents the reference
pitch used by all electronic musical instruments.
(F# –6, G –5, Ab –4, A –3, Bb –2,
B –1, C 0, C# 1, D2, Eb 3, E 4,
F 5) This parameter allows you
to transpose all sections of the
FR-7/FR-5. See page 28 for
details.
B –1, C 0, C# 1, D2, Eb 3, E 4,
F 5) This parameter allows you
to transpose all sections of the
FR-7/FR-5. See page 28 for
details.
This page contains two parame-
ters. The first one allows you to
select the tuning system and the
second one to specify the funda-
mental/root of the key you want
to play in. This was already discussed on page 29.
ters. The first one allows you to
select the tuning system and the
second one to specify the funda-
mental/root of the key you want
to play in. This was already discussed on page 29.
Type: Equal (Off), User 1, User 2, User 3, Arabic1,
Arabic2, Just Major, Just Minor, Pythagorean, Mean-
Tone, Werckmeister, Kirnberger
Key: C, C
Arabic2, Just Major, Just Minor, Pythagorean, Mean-
Tone, Werckmeister, Kirnberger
Key: C, C
#, D, Eb, E, F, F#, G, Ab, A, Bb, B
Here comes a display page with
three selectable and adjustable
parameters. You may have
noticed that there are three
“User” scales. They refer to tun-
ing systems you can program yourself. Obviously, you
only need to do this if none of the factory scales corre-
sponds to the system you would like to use (a gamelan
tuning, for example).
three selectable and adjustable
parameters. You may have
noticed that there are three
“User” scales. They refer to tun-
ing systems you can program yourself. Obviously, you
only need to do this if none of the factory scales corre-
sponds to the system you would like to use (a gamelan
tuning, for example).
As this is a rather complex matter, the procedure for
programming your tuning is a little different from the
adjustment of other parameters:
programming your tuning is a little different from the
adjustment of other parameters:
• After selecting this page, pressing [DATA÷ENTER] will
do nothing.
• Instead, you need to press the [MENU÷WRITE] button
to jump to the following page:
Saving your changes