Roland HandSonic 10 用户手册
26
Advanced Edit
1.
While holding down the [SHIFT] button, press [EDIT].
2.
Press the [
] until you see <EXT TRIG> (external
trigger).
3.
Press the [ ], and you’ll see:
Foot/Pad x2:
For using 2 foot switches, 2 pads or a
combination of Foot switch and a pad or
kick trigger.
combination of Foot switch and a pad or
kick trigger.
Pad (Rim):
When using a head/rim capable pad.
Foot Switch
4.
Press the [
] and when you see this screen, use the
[+]/[-] button and select “FOOTSW.”
Optional foot switches can be used for triggering sounds and
for performing various other functions.
You can use either a single foot switch, (DP-2 etc.) or 2 FS-5Us
(Boss) which will need to be connected with an optional PCS-
31L cable (insert cable). When using 2 foot switches, each one
can have its own individual functions, in addition of course, to
also triggering sounds. Assigning sounds to the foot switches
works exactly like assigning a sound to one of the on-board
pads, as explained on page 9.
When you step on a foot switch, you will see its relative number
(1 or 2) appear at the bottom of the display.
for performing various other functions.
You can use either a single foot switch, (DP-2 etc.) or 2 FS-5Us
(Boss) which will need to be connected with an optional PCS-
31L cable (insert cable). When using 2 foot switches, each one
can have its own individual functions, in addition of course, to
also triggering sounds. Assigning sounds to the foot switches
works exactly like assigning a sound to one of the on-board
pads, as explained on page 9.
When you step on a foot switch, you will see its relative number
(1 or 2) appear at the bottom of the display.
5.
Press the [
] and you will see:
Depending on the foot switch you are using, you may
need to change this parameter. For example, if when you
step on the switch, and you only hear the sound when you
take your foot off, then you should change the polarity.
Some foot switches (ex:FS-5U) have polarity switching
possibilities.
need to change this parameter. For example, if when you
step on the switch, and you only hear the sound when you
take your foot off, then you should change the polarity.
Some foot switches (ex:FS-5U) have polarity switching
possibilities.
6.
Press the [
] and you will see:
Range: 1–127
As a foot switch can not respond to playing dynamics, this
is an important setting.
is an important setting.
7.
Press the [
] and you will see:
Foot Switch Functions
OFF
HH CTRL
:
This allows you to close the open Hi-hat sound (see the
instrument list to know which sounds allow this).
instrument list to know which sounds allow this).
#329: AcuHH
#334: AcuHH 2
#339: ClubHH
#343: ClubHH2
#347: 808 HH
#351: 909 HH
#334: AcuHH 2
#339: ClubHH
#343: ClubHH2
#347: 808 HH
#351: 909 HH
<HH CTRL> will appear above the instrument name in the
display.
display.
KIT+
,
KIT-
:
This allows you to change kits: one step up, or one step
down.
down.
START/STOP
:
This lets you start or stop the metronome.
EFFECT SW
:
This turns the effects on or off.
D BEAM SW
:
This turns the D Beam on or off.
ROLL SW
:
When activating this function, it means that if the ROLL
function is ON for a specific pad, it will only roll while the
foot switch is pressed.
function is ON for a specific pad, it will only roll while the
foot switch is pressed.
Other Triggers
After you have executed steps 1-3 (left column of this
page).
page).
4.
From the Type screen use the [+]/[-] buttons and
select the type of pad you are using.
select the type of pad you are using.
External Trigger Settings
(EXT TRIG)
Display
Pad Compatibility
KD7/8
KD-7, KD-8
KD85/120
KD-80, KD-85, KD-120
PD8
PD-7, PD-8, PD-9
PDX8
PDX-8
PD85/125
PD-80, PD-80R, PD-85, PD-100,
PD-105, PD-120, PD-125
PD-105, PD-120, PD-125
CY5/8
CY-5, CY-8
CY12/14
CY-12R/C, CY-14C, CY-15R
HPD-10_e1.book 26 ページ ２００６年４月７日 金曜日 午後２時１４分