Roland HP103 用户手册

下载
页码 56
 
11
Before You Start Playing
 
 
Using the Music Holders
 
You can use the holders to hold pages in place.
When not using the holders, leave them folded down.
 
* HP103-PE has not music holders.
 
fig.mu_stand4
 
Connecting Headphones
 
The HP103 has two jacks for plugging in headphones. This 
allows two people to listen through headphones 
simultaneously, making it very useful for lessons and when 
performing piano pieces for four hands. Additionally, this 
allows you to play without having to worry about bothering 
others around you, even at night.
 
Plug the headphones into the Phones jack located at the 
bottom left of the piano.
 
When headphones are connected, the [
 (Headphones)] 
indicator (p. 8) lights up, and sounds stop playing from 
the speakers of the HP103.
The headphone volume is adjusted by the [Volume] 
knob (p. 12) of the HP103.
 
fig.00-04.e
NOTE
 
Use Stereo headphones.
 
Some notes on using headphones
 
• To prevent damage to the cord, handle the headphones only by 
the headset or the plug.
• Connecting the headphones when the volume of connected 
equipment is turned up may result in damage to the 
headphones. Lower the volume on the HP103 before plugging 
in the headphones.
• Listening at excessively high volume levels will not only 
damage the headphones, but may also cause hearing loss. Use 
the headphones at a moderate volume level.
 
 
Using the Headphones Hook
 
Whenever you are not using the headphones, you can hang 
them on the headphone hook at the lower left of the HP103.
 
Attaching the Headphone Hook
 
Press and twist the headphone hook included with the 
HP103 into the hole in the bottom of the HP103 (refer to the 
figure below). Turn the wing nut of headphone hook to 
secure the headphone hook.
 
Turning the Power On and Off
NOTE
 
Once the connections have been completed, turn on 
power to your various devices in the order specified. By 
turning on devices in the wrong order, you risk causing 
malfunction and/or damage to speakers and other 
devices.
 
To turn the power on, turn the [Volume] knob all the 
way down, and then press the [Power On] switch.
 
The power will turn on, and the Power indicator at the 
left front of the HP103 will light.
After a few seconds, you will be able to play the 
keyboard to produce sound.
Use the [Volume] knob to adjust the volume.
 
* This unit is equipped with a protection circuit. A brief interval 
(a few seconds) after power up is required before the unit will 
operate normally.
 
fig.00-06.e
 
To turn the power off, turn the [Volume] knob all the 
way to the left, and press the [Power On] switch.
 
The Power indicator at the left front of the HP103 will go 
dark, and the power will be turned off.
 
* If you need to turn off the power completely, first turn off the 
[POWER] switch, then unplug the power cord from the power 
outlet. Refer to “Power Supply” (p. 5).
Phones jack x 2
Headphone Hook
Wing Nut
Power Indicator
Power On
HP103_e.book 11 ページ 2005年3月24日 木曜日 午後4時58分