Roland HP103 用户手册

 

Select one of the three available settings to obtain the 
desired brilliance.

 

fig.00-07.e

 

The pedals have the following functions, and are used 
mainly for piano performance.

 

fig.00-08.e

 

While this pedal is pressed, notes will be sustained even after 
you take your fingers off the keys.

On an acoustic piano, holding down the damper pedal will 
allow the remaining strings to resonate in sympathy with the 
sounds that you played from the keyboard, adding a rich 
resonance.

The HP103 simulates this damper resonance.

 

You can change the amount of resonance applied with 
the damper pedal. Please refer to “Changing the Damper 
Pedal’s Resonance” (p. 35).

 

This pedal sustains only the sounds of the keys that were 
already played when you pressed the pedal.

 

When you hold down this pedal and play the keyboard, the 
sound will have a softer tone.

 

When you move the HP103 or if you feel that the pedals are 
unstable, adjust the adjuster located below the pedals as 
follows.

 

❍

 

Rotate the adjuster to lower it so that it is in firm contact 
with the floor. If there is a gap between the pedals and 
the floor, the pedals may be damaged. In particular 
when placing the instrument on carpet, adjust this so 
that the pedals firmly contact the floor.

 

fig.00-09.j

 

If the adjuster is difficult to turn, have one person lift 
either the left or right side of the stand to make it easier 
for another person to turn the adjuster and make the 
adjustment.

 

After adjusting the adjuster, press the pedals, and if the 

front board moves, turn the adjuster further so that it 

makes firm contact with the floor.

 

Always readjust the adjuster after moving the piano.

 

Brilliance

Medium

Mellow

Bright

Min

Max

Soft Pedal

Sostenuto Pedal

Damper Pedal

Adjuster

HP103_e.book 12 ページ ２００５年３月２４日　木曜日　午後４時５８分